DC-133 is a panel-mount screw-fixed DC power jack (commonly used in Xiaomi first-generation and similar smart devices). It features Ø3.2mm screw mounting holes on both sides, allowing direct fastening to the enclosure panel, providing excellent resistance to plugging/unplugging and vibration. Drawings and free samples are available upon request.

The DC-190 is a 10A high-current fully shielded DC power jack. Featuring heavy-duty conductive terminals and a fully enclosed metal shell design, it offers extremely low contact resistance and excellent EMI resistance and plug/unplug durability, specifically engineered for high-power equipment and industrial-grade power supplies. Drawings and free samples are available upon request.

The DC-190 (White Version) is a 10A high-current fully shielded DC power jack. It features a white high-temperature-resistant engineering plastic insulator and a fully enclosed metal shell, offering extremely low impedance, strong EMI resistance, and excellent surface aesthetics, perfectly matching white/light-colored smart terminals. Drawings and free samples are available upon request.

This embedded PCB-mount DC power jack features a recessed installation design that significantly reduces the height protruding above the motherboard; combined with PCB through-hole plug-in reinforcement legs, it offers excellent pull-out resistance and tear resistance, specifically engineered for ultra-thin devices and high-reliability power interfaces. Drawings and free samples are available upon request.

DS-260 is an IPX7-rated deep waterproof, board-mounted plug-in DC power jack. Rated DC 12V 3A, compatible with Ø3.5x1.35mm plugs. It features PA10T high-temperature-resistant plastic and fully gold-plated terminals, with a board-mounted design combined with DIP through-hole plug-in structure, offering extremely high pull-out and insertion strength and excellent waterproof and airtight performance. Drawings and free samples are available upon request.

This USB 2.0 AF + Type-C double-layer composite female connector adopts a stacked structure (top USB 2.0 A female, bottom Type-C female), integrating the traditional USB interface and the next-generation Type-C interface within the same space, helping PCB motherboards reduce horizontal footprint by more than 50%. It features a fully wrapped metal shielding housing, providing excellent EMI anti-interference capability and high connection strength. The pins support a combination of DIP through-hole and SMT surface-mount installation, widely used in computer motherboards, industrial control computers, audio amplifier panels, smart set-top boxes, and in-vehicle multimedia systems. 2D/3D drawings and free sample services are available.

This USB 2.0 AF + Type-C orange double-layer composite female connector features an eye-catching orange high-temperature-resistant insulator design, typically used to indicate high-current fast-charge or special interface functions. Structurally, it adopts a top-bottom stacked 2-in-1 layout (top USB 2.0 A female, bottom Type-C female), significantly reducing PCB board space usage by 50%. Equipped with a high-strength metal shielding housing and reinforced fixing legs, it offers excellent EMI anti-interference and pull-out resistance. Widely used in portable power stations, fast-charge sockets, in-vehicle charging consoles, industrial control motherboards, and high-end multimedia panels. 2D/3D drawings and free sample services are available.

This HDMI 19-pin male and female connector set adopts a standard 19-pin interface architecture, providing a perfectly matched plug-in solution between the male plug and female receptacle. Both male and female connectors feature high-precision gold-plated terminals and thick metal shielding housings, ensuring ultra-low loss for 4K/8K HD audio-video signal transmission and excellent EMI anti-interference performance. The pins support SMT surface-mount and DIP through-hole reinforcement, widely used in HDMI adapter boards, video capture cards, drone image transmission modules, monitor motherboards, and docking station systems. 2D/3D drawings and free sample services are available.

This USB Type-C 24Pin male three-leg connector features a full-function 24-pin structure and a reinforced "three-leg" metal fixing positioning design. Combined with the front/bottom reinforced plastic positioning base, it effectively disperses insertion and extraction stress, preventing SMT pad peeling and stress-induced breakage. The product is equipped with a high-thickness stainless steel shielding shell and high-conductivity copper gold-plated terminals, supporting 10Gbps/20Gbps high-speed data transmission and 100W/240W PD high-power fast charging. Widely used in Type-C adapters, docking station boards, small board connectors, wireless charging modules, and automotive electronics. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin waterproof female connector adopts an integrated molded sealing structure and a high-elasticity waterproof silicone ring design, achieving IPX7/IPX8 deep waterproof protection. The product simplifies to 6 pin contacts (VBUS, GND, CC1, CC2), specifically designed for high-current charging and basic control scenarios, effectively simplifying PCB layout and reducing SMT soldering defect rates. The shell and pins use high-strength stainless steel and high-conductivity copper gold-plated terminals, supporting 3A~5A high-current blind-mating fast charging. Widely used in outdoor electronics, electric toothbrushes, beauty devices, e-cigarettes, flashlights, and smart wearable devices. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin top-mount female connector adopts a standard Top Mount (surface-mounted on board) structure design, combining a single-row 6Pin SMT patch terminal with dual-side DIP fish-hook/through-hole fixing pins. The simplified pin layout (VBUS, GND, CC1, CC2) is specifically designed for high-efficiency pure charging and basic PD protocol recognition scenarios. The wide pad pitch effectively prevents post-reflow solder bridging and short circuits, significantly improving SMT patch yield; the sturdy four-pin/two-pin through-hole design provides extremely high mechanical peel strength. Widely used in small appliances, electric toys, beauty devices, portable fans, power banks, and various consumer electronics. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin waterproof mid-mount female connector adopts a Mid-Mount (sink plate) structure design, combined with a high-elasticity waterproof silicone ring at the front and an integrated overmolded protective layer, achieving IPX7/IPX8 deep waterproof protection. The sink-mount installation recesses the interface into the PCB thickness line, significantly reducing the overall thickness and stacking height of the terminal device, meeting the stringent space layout requirements of ultra-thin products. The streamlined 6-pin configuration (VBUS, GND, CC1, CC2) is specifically designed for high-current fast charging and basic PD protocol recognition, with wide SMT pad spacing effectively preventing solder bridging after reflow. Widely used in ultra-thin smart wearables, e-cigarettes, portable beauty devices, outdoor small appliances, and high-density waterproof electronic equipment. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin vertical SMT female connector adopts a 180-degree Vertical structure design, combining top single-row 6-Pin SMT terminals with reinforced soldering legs on both sides of the base. The vertical mounting greatly frees up horizontal PCB board space, enabling 90° vertical plug-in direction, specifically designed for base-style charging, upright small appliances, and vertical panel interfaces. The streamlined 6-pin layout (VBUS, GND, CC1, CC2) is designed for high-efficiency pure charging and basic PD protocol recognition, with wide pad spacing effectively preventing solder bridging after reflow and significantly improving SMT pass-through yield. Widely used in electric toothbrush charging bases, beauty device bases, desktop mini fans, smart speakers, and various portable electronic products. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin waterproof vertical SMT female connector adopts a 180-degree Vertical structure design, equipped with a red high-elasticity waterproof silicone ring at the housing step and a bottom integrated overmolded sealing layer, achieving IPX7/IPX8 deep waterproof protection. The vertical mounting significantly saves horizontal PCB board space, making it ideal for waterproof terminal devices requiring vertical plug-in or vertical panel openings. The streamlined 6-pin layout (VBUS, GND, CC1, CC2) is designed for high-efficiency pure charging and basic PD protocol recognition, with top single-row wide pad spacing effectively preventing solder bridging after reflow. Widely used in waterproof charging bases, outdoor handheld terminals, electric toothbrush/beauty device bases, and waterproof smart hardware. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin horizontal SMT female connector with mounting holes features a horizontal SMT patch structure, with a breakthrough design that integrates screw locking ears (Panel Mount / Screw Locking) on both sides of the plastic core, allowing the interface to be securely fastened to the product enclosure panel via screws. This physical locking structure completely eliminates stress tearing on PCB pads caused by frequent plugging/unplugging and strong vibration, greatly enhancing the mechanical durability of the entire device. The streamlined 6-Pin layout (VBUS, GND, CC1, CC2) is specifically designed for high-efficiency pure charging and basic PD protocol recognition, with a single-row wide-pitch pad layout that effectively prevents solder bridging after reflow. Widely used in automotive electronics, industrial control equipment, outdoor handheld terminals, small appliances with enclosure locking, and various high-reliability charging interfaces. 2D/3D drawings and free sample service available.

DC-133 is a panel-mount screw-fixed DC power jack (commonly used in Xiaomi first-generation and similar smart devices). It features Ø3.2mm screw mounting holes on both sides, allowing direct fastening to the enclosure panel, providing excellent resistance to plugging/unplugging and vibration. Drawings and free samples are available upon request.

The DC-190 is a 10A high-current fully shielded DC power jack. Featuring heavy-duty conductive terminals and a fully enclosed metal shell design, it offers extremely low contact resistance and excellent EMI resistance and plug/unplug durability, specifically engineered for high-power equipment and industrial-grade power supplies. Drawings and free samples are available upon request.

The DC-190 (White Version) is a 10A high-current fully shielded DC power jack. It features a white high-temperature-resistant engineering plastic insulator and a fully enclosed metal shell, offering extremely low impedance, strong EMI resistance, and excellent surface aesthetics, perfectly matching white/light-colored smart terminals. Drawings and free samples are available upon request.

This embedded PCB-mount DC power jack features a recessed installation design that significantly reduces the height protruding above the motherboard; combined with PCB through-hole plug-in reinforcement legs, it offers excellent pull-out resistance and tear resistance, specifically engineered for ultra-thin devices and high-reliability power interfaces. Drawings and free samples are available upon request.

DS-260 is an IPX7-rated deep waterproof, board-mounted plug-in DC power jack. Rated DC 12V 3A, compatible with Ø3.5x1.35mm plugs. It features PA10T high-temperature-resistant plastic and fully gold-plated terminals, with a board-mounted design combined with DIP through-hole plug-in structure, offering extremely high pull-out and insertion strength and excellent waterproof and airtight performance. Drawings and free samples are available upon request.

This USB 2.0 AF + Type-C double-layer composite female connector adopts a stacked structure (top USB 2.0 A female, bottom Type-C female), integrating the traditional USB interface and the next-generation Type-C interface within the same space, helping PCB motherboards reduce horizontal footprint by more than 50%. It features a fully wrapped metal shielding housing, providing excellent EMI anti-interference capability and high connection strength. The pins support a combination of DIP through-hole and SMT surface-mount installation, widely used in computer motherboards, industrial control computers, audio amplifier panels, smart set-top boxes, and in-vehicle multimedia systems. 2D/3D drawings and free sample services are available.

This USB 2.0 AF + Type-C orange double-layer composite female connector features an eye-catching orange high-temperature-resistant insulator design, typically used to indicate high-current fast-charge or special interface functions. Structurally, it adopts a top-bottom stacked 2-in-1 layout (top USB 2.0 A female, bottom Type-C female), significantly reducing PCB board space usage by 50%. Equipped with a high-strength metal shielding housing and reinforced fixing legs, it offers excellent EMI anti-interference and pull-out resistance. Widely used in portable power stations, fast-charge sockets, in-vehicle charging consoles, industrial control motherboards, and high-end multimedia panels. 2D/3D drawings and free sample services are available.

This HDMI 19-pin male and female connector set adopts a standard 19-pin interface architecture, providing a perfectly matched plug-in solution between the male plug and female receptacle. Both male and female connectors feature high-precision gold-plated terminals and thick metal shielding housings, ensuring ultra-low loss for 4K/8K HD audio-video signal transmission and excellent EMI anti-interference performance. The pins support SMT surface-mount and DIP through-hole reinforcement, widely used in HDMI adapter boards, video capture cards, drone image transmission modules, monitor motherboards, and docking station systems. 2D/3D drawings and free sample services are available.

This USB Type-C 24Pin male three-leg connector features a full-function 24-pin structure and a reinforced "three-leg" metal fixing positioning design. Combined with the front/bottom reinforced plastic positioning base, it effectively disperses insertion and extraction stress, preventing SMT pad peeling and stress-induced breakage. The product is equipped with a high-thickness stainless steel shielding shell and high-conductivity copper gold-plated terminals, supporting 10Gbps/20Gbps high-speed data transmission and 100W/240W PD high-power fast charging. Widely used in Type-C adapters, docking station boards, small board connectors, wireless charging modules, and automotive electronics. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin waterproof female connector adopts an integrated molded sealing structure and a high-elasticity waterproof silicone ring design, achieving IPX7/IPX8 deep waterproof protection. The product simplifies to 6 pin contacts (VBUS, GND, CC1, CC2), specifically designed for high-current charging and basic control scenarios, effectively simplifying PCB layout and reducing SMT soldering defect rates. The shell and pins use high-strength stainless steel and high-conductivity copper gold-plated terminals, supporting 3A~5A high-current blind-mating fast charging. Widely used in outdoor electronics, electric toothbrushes, beauty devices, e-cigarettes, flashlights, and smart wearable devices. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin top-mount female connector adopts a standard Top Mount (surface-mounted on board) structure design, combining a single-row 6Pin SMT patch terminal with dual-side DIP fish-hook/through-hole fixing pins. The simplified pin layout (VBUS, GND, CC1, CC2) is specifically designed for high-efficiency pure charging and basic PD protocol recognition scenarios. The wide pad pitch effectively prevents post-reflow solder bridging and short circuits, significantly improving SMT patch yield; the sturdy four-pin/two-pin through-hole design provides extremely high mechanical peel strength. Widely used in small appliances, electric toys, beauty devices, portable fans, power banks, and various consumer electronics. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin waterproof mid-mount female connector adopts a Mid-Mount (sink plate) structure design, combined with a high-elasticity waterproof silicone ring at the front and an integrated overmolded protective layer, achieving IPX7/IPX8 deep waterproof protection. The sink-mount installation recesses the interface into the PCB thickness line, significantly reducing the overall thickness and stacking height of the terminal device, meeting the stringent space layout requirements of ultra-thin products. The streamlined 6-pin configuration (VBUS, GND, CC1, CC2) is specifically designed for high-current fast charging and basic PD protocol recognition, with wide SMT pad spacing effectively preventing solder bridging after reflow. Widely used in ultra-thin smart wearables, e-cigarettes, portable beauty devices, outdoor small appliances, and high-density waterproof electronic equipment. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin vertical SMT female connector adopts a 180-degree Vertical structure design, combining top single-row 6-Pin SMT terminals with reinforced soldering legs on both sides of the base. The vertical mounting greatly frees up horizontal PCB board space, enabling 90° vertical plug-in direction, specifically designed for base-style charging, upright small appliances, and vertical panel interfaces. The streamlined 6-pin layout (VBUS, GND, CC1, CC2) is designed for high-efficiency pure charging and basic PD protocol recognition, with wide pad spacing effectively preventing solder bridging after reflow and significantly improving SMT pass-through yield. Widely used in electric toothbrush charging bases, beauty device bases, desktop mini fans, smart speakers, and various portable electronic products. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin waterproof vertical SMT female connector adopts a 180-degree Vertical structure design, equipped with a red high-elasticity waterproof silicone ring at the housing step and a bottom integrated overmolded sealing layer, achieving IPX7/IPX8 deep waterproof protection. The vertical mounting significantly saves horizontal PCB board space, making it ideal for waterproof terminal devices requiring vertical plug-in or vertical panel openings. The streamlined 6-pin layout (VBUS, GND, CC1, CC2) is designed for high-efficiency pure charging and basic PD protocol recognition, with top single-row wide pad spacing effectively preventing solder bridging after reflow. Widely used in waterproof charging bases, outdoor handheld terminals, electric toothbrush/beauty device bases, and waterproof smart hardware. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin horizontal SMT female connector with mounting holes features a horizontal SMT patch structure, with a breakthrough design that integrates screw locking ears (Panel Mount / Screw Locking) on both sides of the plastic core, allowing the interface to be securely fastened to the product enclosure panel via screws. This physical locking structure completely eliminates stress tearing on PCB pads caused by frequent plugging/unplugging and strong vibration, greatly enhancing the mechanical durability of the entire device. The streamlined 6-Pin layout (VBUS, GND, CC1, CC2) is specifically designed for high-efficiency pure charging and basic PD protocol recognition, with a single-row wide-pitch pad layout that effectively prevents solder bridging after reflow. Widely used in automotive electronics, industrial control equipment, outdoor handheld terminals, small appliances with enclosure locking, and various high-reliability charging interfaces. 2D/3D drawings and free sample service available.

DC-133 is a panel-mount screw-fixed DC power jack (commonly used in Xiaomi first-generation and similar smart devices). It features Ø3.2mm screw mounting holes on both sides, allowing direct fastening to the enclosure panel, providing excellent resistance to plugging/unplugging and vibration. Drawings and free samples are available upon request.

The DC-190 is a 10A high-current fully shielded DC power jack. Featuring heavy-duty conductive terminals and a fully enclosed metal shell design, it offers extremely low contact resistance and excellent EMI resistance and plug/unplug durability, specifically engineered for high-power equipment and industrial-grade power supplies. Drawings and free samples are available upon request.

The DC-190 (White Version) is a 10A high-current fully shielded DC power jack. It features a white high-temperature-resistant engineering plastic insulator and a fully enclosed metal shell, offering extremely low impedance, strong EMI resistance, and excellent surface aesthetics, perfectly matching white/light-colored smart terminals. Drawings and free samples are available upon request.

This embedded PCB-mount DC power jack features a recessed installation design that significantly reduces the height protruding above the motherboard; combined with PCB through-hole plug-in reinforcement legs, it offers excellent pull-out resistance and tear resistance, specifically engineered for ultra-thin devices and high-reliability power interfaces. Drawings and free samples are available upon request.

DS-260 is an IPX7-rated deep waterproof, board-mounted plug-in DC power jack. Rated DC 12V 3A, compatible with Ø3.5x1.35mm plugs. It features PA10T high-temperature-resistant plastic and fully gold-plated terminals, with a board-mounted design combined with DIP through-hole plug-in structure, offering extremely high pull-out and insertion strength and excellent waterproof and airtight performance. Drawings and free samples are available upon request.

This USB 2.0 AF + Type-C double-layer composite female connector adopts a stacked structure (top USB 2.0 A female, bottom Type-C female), integrating the traditional USB interface and the next-generation Type-C interface within the same space, helping PCB motherboards reduce horizontal footprint by more than 50%. It features a fully wrapped metal shielding housing, providing excellent EMI anti-interference capability and high connection strength. The pins support a combination of DIP through-hole and SMT surface-mount installation, widely used in computer motherboards, industrial control computers, audio amplifier panels, smart set-top boxes, and in-vehicle multimedia systems. 2D/3D drawings and free sample services are available.

This USB 2.0 AF + Type-C orange double-layer composite female connector features an eye-catching orange high-temperature-resistant insulator design, typically used to indicate high-current fast-charge or special interface functions. Structurally, it adopts a top-bottom stacked 2-in-1 layout (top USB 2.0 A female, bottom Type-C female), significantly reducing PCB board space usage by 50%. Equipped with a high-strength metal shielding housing and reinforced fixing legs, it offers excellent EMI anti-interference and pull-out resistance. Widely used in portable power stations, fast-charge sockets, in-vehicle charging consoles, industrial control motherboards, and high-end multimedia panels. 2D/3D drawings and free sample services are available.

This HDMI 19-pin male and female connector set adopts a standard 19-pin interface architecture, providing a perfectly matched plug-in solution between the male plug and female receptacle. Both male and female connectors feature high-precision gold-plated terminals and thick metal shielding housings, ensuring ultra-low loss for 4K/8K HD audio-video signal transmission and excellent EMI anti-interference performance. The pins support SMT surface-mount and DIP through-hole reinforcement, widely used in HDMI adapter boards, video capture cards, drone image transmission modules, monitor motherboards, and docking station systems. 2D/3D drawings and free sample services are available.

This USB Type-C 24Pin male three-leg connector features a full-function 24-pin structure and a reinforced "three-leg" metal fixing positioning design. Combined with the front/bottom reinforced plastic positioning base, it effectively disperses insertion and extraction stress, preventing SMT pad peeling and stress-induced breakage. The product is equipped with a high-thickness stainless steel shielding shell and high-conductivity copper gold-plated terminals, supporting 10Gbps/20Gbps high-speed data transmission and 100W/240W PD high-power fast charging. Widely used in Type-C adapters, docking station boards, small board connectors, wireless charging modules, and automotive electronics. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin waterproof female connector adopts an integrated molded sealing structure and a high-elasticity waterproof silicone ring design, achieving IPX7/IPX8 deep waterproof protection. The product simplifies to 6 pin contacts (VBUS, GND, CC1, CC2), specifically designed for high-current charging and basic control scenarios, effectively simplifying PCB layout and reducing SMT soldering defect rates. The shell and pins use high-strength stainless steel and high-conductivity copper gold-plated terminals, supporting 3A~5A high-current blind-mating fast charging. Widely used in outdoor electronics, electric toothbrushes, beauty devices, e-cigarettes, flashlights, and smart wearable devices. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin top-mount female connector adopts a standard Top Mount (surface-mounted on board) structure design, combining a single-row 6Pin SMT patch terminal with dual-side DIP fish-hook/through-hole fixing pins. The simplified pin layout (VBUS, GND, CC1, CC2) is specifically designed for high-efficiency pure charging and basic PD protocol recognition scenarios. The wide pad pitch effectively prevents post-reflow solder bridging and short circuits, significantly improving SMT patch yield; the sturdy four-pin/two-pin through-hole design provides extremely high mechanical peel strength. Widely used in small appliances, electric toys, beauty devices, portable fans, power banks, and various consumer electronics. 2D/3D drawings and free sample service are provided.

This USB Type-C 6Pin waterproof mid-mount female connector adopts a Mid-Mount (sink plate) structure design, combined with a high-elasticity waterproof silicone ring at the front and an integrated overmolded protective layer, achieving IPX7/IPX8 deep waterproof protection. The sink-mount installation recesses the interface into the PCB thickness line, significantly reducing the overall thickness and stacking height of the terminal device, meeting the stringent space layout requirements of ultra-thin products. The streamlined 6-pin configuration (VBUS, GND, CC1, CC2) is specifically designed for high-current fast charging and basic PD protocol recognition, with wide SMT pad spacing effectively preventing solder bridging after reflow. Widely used in ultra-thin smart wearables, e-cigarettes, portable beauty devices, outdoor small appliances, and high-density waterproof electronic equipment. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin vertical SMT female connector adopts a 180-degree Vertical structure design, combining top single-row 6-Pin SMT terminals with reinforced soldering legs on both sides of the base. The vertical mounting greatly frees up horizontal PCB board space, enabling 90° vertical plug-in direction, specifically designed for base-style charging, upright small appliances, and vertical panel interfaces. The streamlined 6-pin layout (VBUS, GND, CC1, CC2) is designed for high-efficiency pure charging and basic PD protocol recognition, with wide pad spacing effectively preventing solder bridging after reflow and significantly improving SMT pass-through yield. Widely used in electric toothbrush charging bases, beauty device bases, desktop mini fans, smart speakers, and various portable electronic products. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin waterproof vertical SMT female connector adopts a 180-degree Vertical structure design, equipped with a red high-elasticity waterproof silicone ring at the housing step and a bottom integrated overmolded sealing layer, achieving IPX7/IPX8 deep waterproof protection. The vertical mounting significantly saves horizontal PCB board space, making it ideal for waterproof terminal devices requiring vertical plug-in or vertical panel openings. The streamlined 6-pin layout (VBUS, GND, CC1, CC2) is designed for high-efficiency pure charging and basic PD protocol recognition, with top single-row wide pad spacing effectively preventing solder bridging after reflow. Widely used in waterproof charging bases, outdoor handheld terminals, electric toothbrush/beauty device bases, and waterproof smart hardware. 2D/3D drawings and free sample requests are available.

This USB Type-C 6Pin horizontal SMT female connector with mounting holes features a horizontal SMT patch structure, with a breakthrough design that integrates screw locking ears (Panel Mount / Screw Locking) on both sides of the plastic core, allowing the interface to be securely fastened to the product enclosure panel via screws. This physical locking structure completely eliminates stress tearing on PCB pads caused by frequent plugging/unplugging and strong vibration, greatly enhancing the mechanical durability of the entire device. The streamlined 6-Pin layout (VBUS, GND, CC1, CC2) is specifically designed for high-efficiency pure charging and basic PD protocol recognition, with a single-row wide-pitch pad layout that effectively prevents solder bridging after reflow. Widely used in automotive electronics, industrial control equipment, outdoor handheld terminals, small appliances with enclosure locking, and various high-reliability charging interfaces. 2D/3D drawings and free sample service available.