This SS-12D02 straight-handle miniature slide switch (Vertical Slide Switch SS-12D02 1P2T 3 Pin Through-Hole) features a design combining a "high-strength metal anti-corrosion housing + black POM engineering plastic straight handle + single-row 3-pin straight terminal pins + dual-side reinforced mounting legs." The circuit configuration is single-pole double-throw (1P2T, two-position ON-ON), enabling stable switching of a single power or signal line. The bracket positioning legs extending from both sides of the housing can be directly reflow-soldered onto the PCB, significantly absorbing lateral forces during toggle operation and protecting the 3 signal pins from stress concentration and solder detachment. The high-conductivity silver-plated contacts ensure smooth soldering and extremely low contact resistance. Widely used in digital toys, portable audio devices, small household appliances, medical instruments, and various PCB-mounted power control applications. 2D/3D drawings and free sample request services are available.

This SS-12D10 straight-handle miniature slide switch (Vertical Slide Switch SS-12D10 High Current 3A 1P2T 3 Pin Through-Hole) features a design of "thickened anti-corrosion metal housing + black anti-slip textured POM straight handle + single row 3-pin silver-plated straight terminal pins + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically optimized for power lines or strong-signal switching carrying up to 3A current; the anti-slip textured handle provides crisp damping and a strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals offer fast solder wetting and secure soldering. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, household small appliances, and various PCB mainboards requiring safe high-current switching. 2D/3D drawings and free sample service are available.

This SS-12D11 straight-handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12D11 High Current 3A 1P2T 3 Pin Through-Hole) features a "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + single-row 3-pin horizontal/right-angle silver-plated terminals + high-temperature-resistant high-current contact system" design. The circuit configuration is single-pole double-throw (1P2T 2-position ON-ON), optimized for power lines or strong-signal side switching carrying up to 3A current; the horizontal right-angle pins are ideal for mounting along the PCB edge for side operation, the anti-slip textured handle provides crisp damping and strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong solder joints. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample request service are available.

This SS-12D16 straight-handle miniature toggle switch (Panel Mount Slide Switch SS-12D16 High Current 3A 1P2T 3 Pin Solder Lug with Ears) features a design of "screw-mounting ears on both sides of the housing + black anti-slip textured POM straight handle + single-row 3-pin solder lug terminals with holes + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically designed for scenarios requiring panel hole mounting with screw fixation and 3A high-current flying-lead soldering. The ears on both sides can be securely fastened to the equipment chassis with screws, withstanding high toggle forces. The 3-pin terminals feature standard wire-through holes, allowing wires to be hooked through before soldering, greatly enhancing physical pull-out resistance and preventing wire detachment. The embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise. Widely used in high-power lighting fixtures, control cabinet panels, portable energy storage devices, household small appliances, and various hardware systems requiring panel-locked high-current switching. 2D/3D drawings and free sample request service are available.

This upgraded derivative model of SS-12D11, the SS-12D28 Straight Handle Mini Toggle Switch (Right Angle Slide Switch SS-12D28 High Current 3A 1P2T 3 Pin Long Pins), features a design of "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + eye-catching red high-insulation engineering plastic base + single row 3 Pin long bent pins 90 degree side insert silver-plated terminals + high-temperature resistant high-current contact system." The circuit configuration is single pole double throw (1P2T two position ON-ON), specifically optimized for withstanding up to 3A current and for power line side switching operations requiring extended pins for through-hole board mounting or bridging; the extended 90 degree bent pin design facilitates fitting along the PCB edge and provides more stable mechanical through-hole soldering support; the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong soldering reliability. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample requests are available.

This SS-12F23 straight handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12F23 Low Current 1P2T 5 Pin Through-Hole) features a design of "metal thickened anti-corrosion shell + black anti-slip textured POM straight handle + single row 3 Pin horizontal/right angle silver-plated terminals + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T 2 position ON-ON), specifically optimized for low current signal switching, logic control, and low power supply circuits; the horizontal right angle pins facilitate side operation when mounted along the PCB edge, and the anti-slip textured handle provides crisp damping with strong detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable signal transmission; terminals offer fast solder wetting and strong solder joints. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control boards. 2D/3D drawings and free sample request service are available.

This SS-12F24 straight handle miniature toggle switch (Vertical Slide Switch SS-12F24 1P2T 3 Pin DIP Straight Pins) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 3 Pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T two-position ON-ON), specifically optimized for vertical through-hole mounting on PCB mainboards, low-current signal switching, and low-power power supply circuits; the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control mainboards. 2D/3D drawings and free sample requests are available.

This SS-13D01 straight-handle miniature toggle switch (Vertical Slide Switch SS-13D01 1P3T 4 Pin DIP Straight Pins 3-Position) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 4-pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for vertical through-hole mounting on PCB motherboards and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear, distinct position feedback; internally, high-precision silver-plated contacts deliver low contact resistance and stable conduction performance. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control motherboards requiring 3-position function switching. 2D/3D drawings and free sample requests are available.

This SS-13F03 straight-handle miniature vertical 3-position slide switch (Vertical Slide Switch SS-13F03 4 Pin 1P3T 3 Position Straight Handle) features a rugged design with "thickened fully-enclosed metal shell + black anti-slip knurled straight handle + special offset dual-row 4-pin silver-plated terminals (front row: 1 common pin + rear row: 3 switching pins) + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), providing single-circuit 3-stage mode selection capability (e.g., "Off - Low - High," "3-stage audio tone adjustment," "3-position function switching"). The unique offset 1+3 pin layout greatly optimizes PCB trace routing and prevents reverse insertion during assembly. Both sides of the shell feature dedicated PCB reinforcement mounting feet that precisely snap into PCB mounting holes, significantly improving assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces. The handle damping is crisp and moderate, with strong detent feel across all three positions and precise positioning. Internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio equipment, mixing consoles, home appliances, medical instruments, and various PCB through-hole motherboards requiring 3-position logic control. 2D/3D drawings and free sample requests are available.

This SS-13F05 straight-handle high-current slide switch (Slide Switch SS-13F05 1P3T 3-Position Solder Lugs) features a rugged design combining a "white high-insulation flame-retardant engineering plastic housing + large smooth straight handle + solder lug terminals with holes at both ends + high-quality copper alloy silver-plated moving and fixed contacts." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for household appliances, power tools, and wire harness soldering connections, capable of withstanding high currents and frequent manual switching operations. The metal solder lugs with holes at both ends are very convenient for threading wires through for soldering or plug-in connections. The detent action is crisp with extremely clear positioning; the internal thick silver-plated contacts effectively reduce contact resistance, delivering excellent arc resistance and long service life. Widely used in electric fan speed adjustment, heater power switching, multi-stage lighting dimming, power tools, and various household and industrial equipment requiring 3-position wire harness switches. 2D/3D drawings and free sample requests are available.

This SS-13F24 straight handle mini toggle switch (Horizontal Right Angle Slide Switch SS-13F24 1P3T 4 Pin DIP 3-Position) features a design of "thickened metal anti-corrosion shell + black anti-slip textured POM straight handle + single row 4-Pin horizontal side-insert silver-plated terminals + PCB fold-angle reinforcement positioning feet on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole triple throw (1P3T 3-position switching), optimized for PCB motherboard edge side-insert mounting and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the horizontal side-insert pins combined with through-hole bent feet on both sides of the shell can be firmly locked onto the PCB board edge, effectively absorbing lateral toggle force and side pressure; the anti-slip textured handle provides crisp damping and clear, definite position detents; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control boards requiring side 3-position function switching. 2D/3D drawings and free sample requests are available.

This SS-14D01 straight handle miniature vertical four-position slide switch (Vertical Slide Switch SS-14D01 6 Pin 1P4T 4 Position Straight Handle) features a rugged design with "thickened fully enclosed metal shell + black anti-slip knurled straight handle + single row 6 Pin vertical DIP silver-plated terminals + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is single pole four throw (1P4T four-position switching), providing single-circuit 4-segment mode selection capability (such as "OFF - Position 1 - Position 2 - Position 3," "four-stage function switching"); the shell has dedicated PCB reinforcement mounting feet on both sides that precisely snap into PCB board holes, significantly improving assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces; the handle damping is crisp and moderate, with strong detent feel across all four positions and precise positioning; internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio systems, mixing consoles, home appliances, medical instruments, and various PCB through-hole motherboards requiring four-position logic control. 2D/3D drawings and free sample requests are available.

This SS-22D03 straight handle miniature vertical 2-position toggle switch (Vertical Slide Switch SS-22D03 6 Pin 2P2T 2 Position Vertical Straight Handle) features a rugged design with "thickened fully enclosed metal shell + black anti-slip knurled straight handle + dual row 6 Pin vertical through-hole silver-plated terminals + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is double pole double throw (2P2T 2-position switching), providing dual-circuit 2-stage synchronous selection capability (e.g., "ON - OFF," "dual-channel power/signal synchronous switching"). The shell includes dedicated PCB reinforcement mounting feet on both sides that precisely snap into PCB through-holes, significantly enhancing assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces. The handle damping is crisp and moderate, with strong detent feel at both positions and precise positioning. Internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio systems, mixing consoles, household appliances, medical instruments, and various PCB through-hole motherboards requiring 2-position logic control. 2D/3D drawings and free sample request service are available.

This SS-22D28 high current straight handle mini toggle switch (Horizontal Right Angle Slide Switch SS-22D28 6 Pin 2P2T 3A High Current Metal Handle) adopts a reinforced design featuring a "fully wrapped metal thickened shell + textured metal cylindrical straight handle + dual row 6 Pin horizontal 90 degree long bent pin silver-plated terminals + red high-insulation engineering plastic base." The circuit configuration is double pole double throw (2P2T two-position switching), with a **rated load of up to 3A**, specifically optimized for PCB motherboard edge side-insert installation, deep panel shaft extension, and high current/high power dual-circuit synchronous control (such as simultaneous cut-off/connection of high current power supply positive and negative terminals, high-end audio power main switch, and high power switching for operating modes); the 90 degree horizontal long pin design greatly facilitates insertion and fixation when the enclosure panel has deeper space, providing excellent structural stability; the metal cylindrical handle offers outstanding tactile quality, crisp damping, and clear two-position detent feel; internally, high-precision thickened silver-plated contacts ensure low contact resistance, minimal temperature rise, and stable conduction performance. Widely used in high-power digital audio, instrumentation, household small appliances, and various PCB control motherboards requiring panel side shaft extension and 3A current synchronous switching. 2D/3D drawings and free sample request service are available.

This SS-22F04 low-current straight-handle miniature toggle switch (Vertical Slide Switch SS-22F04 6 Pin 2P2T 2-Position Low Current) features a design of "fully enclosed anti-corrosion metal shell + black anti-slip POM high straight handle + dual-row 6-pin vertical through-hole silver-plated terminals + PCB corner-bent fixing legs on both sides + yellow high-insulation engineering plastic base." The circuit configuration is double-pole double-throw (2P2T 2-position switching), **optimized specifically for low current (e.g., DC 12V 0.1A / DC 50V 0.3A) and micro-signal control**; the vertical through-hole pins combined with the bent legs through holes on both sides of the shell allow secure fixation onto the PCB motherboard, effectively absorbing push-pull and press forces; the black high straight handle provides crisp damping and clear 2-position detent feel; internally, high-precision silver-plated contacts ensure low contact resistance, stable signal conduction without drift. Widely used in portable audio, digital devices, small household appliances, instruments and meters, and various PCB control motherboards requiring vertical dual-channel synchronous signal/mode switching. 2D/3D drawings and free sample request service are available.

This SS-12D02 straight-handle miniature slide switch (Vertical Slide Switch SS-12D02 1P2T 3 Pin Through-Hole) features a design combining a "high-strength metal anti-corrosion housing + black POM engineering plastic straight handle + single-row 3-pin straight terminal pins + dual-side reinforced mounting legs." The circuit configuration is single-pole double-throw (1P2T, two-position ON-ON), enabling stable switching of a single power or signal line. The bracket positioning legs extending from both sides of the housing can be directly reflow-soldered onto the PCB, significantly absorbing lateral forces during toggle operation and protecting the 3 signal pins from stress concentration and solder detachment. The high-conductivity silver-plated contacts ensure smooth soldering and extremely low contact resistance. Widely used in digital toys, portable audio devices, small household appliances, medical instruments, and various PCB-mounted power control applications. 2D/3D drawings and free sample request services are available.

This SS-12D10 straight-handle miniature slide switch (Vertical Slide Switch SS-12D10 High Current 3A 1P2T 3 Pin Through-Hole) features a design of "thickened anti-corrosion metal housing + black anti-slip textured POM straight handle + single row 3-pin silver-plated straight terminal pins + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically optimized for power lines or strong-signal switching carrying up to 3A current; the anti-slip textured handle provides crisp damping and a strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals offer fast solder wetting and secure soldering. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, household small appliances, and various PCB mainboards requiring safe high-current switching. 2D/3D drawings and free sample service are available.

This SS-12D11 straight-handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12D11 High Current 3A 1P2T 3 Pin Through-Hole) features a "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + single-row 3-pin horizontal/right-angle silver-plated terminals + high-temperature-resistant high-current contact system" design. The circuit configuration is single-pole double-throw (1P2T 2-position ON-ON), optimized for power lines or strong-signal side switching carrying up to 3A current; the horizontal right-angle pins are ideal for mounting along the PCB edge for side operation, the anti-slip textured handle provides crisp damping and strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong solder joints. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample request service are available.

This SS-12D16 straight-handle miniature toggle switch (Panel Mount Slide Switch SS-12D16 High Current 3A 1P2T 3 Pin Solder Lug with Ears) features a design of "screw-mounting ears on both sides of the housing + black anti-slip textured POM straight handle + single-row 3-pin solder lug terminals with holes + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically designed for scenarios requiring panel hole mounting with screw fixation and 3A high-current flying-lead soldering. The ears on both sides can be securely fastened to the equipment chassis with screws, withstanding high toggle forces. The 3-pin terminals feature standard wire-through holes, allowing wires to be hooked through before soldering, greatly enhancing physical pull-out resistance and preventing wire detachment. The embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise. Widely used in high-power lighting fixtures, control cabinet panels, portable energy storage devices, household small appliances, and various hardware systems requiring panel-locked high-current switching. 2D/3D drawings and free sample request service are available.

This upgraded derivative model of SS-12D11, the SS-12D28 Straight Handle Mini Toggle Switch (Right Angle Slide Switch SS-12D28 High Current 3A 1P2T 3 Pin Long Pins), features a design of "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + eye-catching red high-insulation engineering plastic base + single row 3 Pin long bent pins 90 degree side insert silver-plated terminals + high-temperature resistant high-current contact system." The circuit configuration is single pole double throw (1P2T two position ON-ON), specifically optimized for withstanding up to 3A current and for power line side switching operations requiring extended pins for through-hole board mounting or bridging; the extended 90 degree bent pin design facilitates fitting along the PCB edge and provides more stable mechanical through-hole soldering support; the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong soldering reliability. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample requests are available.

This SS-12F23 straight handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12F23 Low Current 1P2T 5 Pin Through-Hole) features a design of "metal thickened anti-corrosion shell + black anti-slip textured POM straight handle + single row 3 Pin horizontal/right angle silver-plated terminals + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T 2 position ON-ON), specifically optimized for low current signal switching, logic control, and low power supply circuits; the horizontal right angle pins facilitate side operation when mounted along the PCB edge, and the anti-slip textured handle provides crisp damping with strong detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable signal transmission; terminals offer fast solder wetting and strong solder joints. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control boards. 2D/3D drawings and free sample request service are available.

This SS-12F24 straight handle miniature toggle switch (Vertical Slide Switch SS-12F24 1P2T 3 Pin DIP Straight Pins) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 3 Pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T two-position ON-ON), specifically optimized for vertical through-hole mounting on PCB mainboards, low-current signal switching, and low-power power supply circuits; the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control mainboards. 2D/3D drawings and free sample requests are available.

This SS-13D01 straight-handle miniature toggle switch (Vertical Slide Switch SS-13D01 1P3T 4 Pin DIP Straight Pins 3-Position) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 4-pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for vertical through-hole mounting on PCB motherboards and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear, distinct position feedback; internally, high-precision silver-plated contacts deliver low contact resistance and stable conduction performance. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control motherboards requiring 3-position function switching. 2D/3D drawings and free sample requests are available.

This SS-13F03 straight-handle miniature vertical 3-position slide switch (Vertical Slide Switch SS-13F03 4 Pin 1P3T 3 Position Straight Handle) features a rugged design with "thickened fully-enclosed metal shell + black anti-slip knurled straight handle + special offset dual-row 4-pin silver-plated terminals (front row: 1 common pin + rear row: 3 switching pins) + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), providing single-circuit 3-stage mode selection capability (e.g., "Off - Low - High," "3-stage audio tone adjustment," "3-position function switching"). The unique offset 1+3 pin layout greatly optimizes PCB trace routing and prevents reverse insertion during assembly. Both sides of the shell feature dedicated PCB reinforcement mounting feet that precisely snap into PCB mounting holes, significantly improving assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces. The handle damping is crisp and moderate, with strong detent feel across all three positions and precise positioning. Internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio equipment, mixing consoles, home appliances, medical instruments, and various PCB through-hole motherboards requiring 3-position logic control. 2D/3D drawings and free sample requests are available.

This SS-13F05 straight-handle high-current slide switch (Slide Switch SS-13F05 1P3T 3-Position Solder Lugs) features a rugged design combining a "white high-insulation flame-retardant engineering plastic housing + large smooth straight handle + solder lug terminals with holes at both ends + high-quality copper alloy silver-plated moving and fixed contacts." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for household appliances, power tools, and wire harness soldering connections, capable of withstanding high currents and frequent manual switching operations. The metal solder lugs with holes at both ends are very convenient for threading wires through for soldering or plug-in connections. The detent action is crisp with extremely clear positioning; the internal thick silver-plated contacts effectively reduce contact resistance, delivering excellent arc resistance and long service life. Widely used in electric fan speed adjustment, heater power switching, multi-stage lighting dimming, power tools, and various household and industrial equipment requiring 3-position wire harness switches. 2D/3D drawings and free sample requests are available.

This SS-13F24 straight handle mini toggle switch (Horizontal Right Angle Slide Switch SS-13F24 1P3T 4 Pin DIP 3-Position) features a design of "thickened metal anti-corrosion shell + black anti-slip textured POM straight handle + single row 4-Pin horizontal side-insert silver-plated terminals + PCB fold-angle reinforcement positioning feet on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole triple throw (1P3T 3-position switching), optimized for PCB motherboard edge side-insert mounting and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the horizontal side-insert pins combined with through-hole bent feet on both sides of the shell can be firmly locked onto the PCB board edge, effectively absorbing lateral toggle force and side pressure; the anti-slip textured handle provides crisp damping and clear, definite position detents; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control boards requiring side 3-position function switching. 2D/3D drawings and free sample requests are available.

This SS-14D01 straight handle miniature vertical four-position slide switch (Vertical Slide Switch SS-14D01 6 Pin 1P4T 4 Position Straight Handle) features a rugged design with "thickened fully enclosed metal shell + black anti-slip knurled straight handle + single row 6 Pin vertical DIP silver-plated terminals + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is single pole four throw (1P4T four-position switching), providing single-circuit 4-segment mode selection capability (such as "OFF - Position 1 - Position 2 - Position 3," "four-stage function switching"); the shell has dedicated PCB reinforcement mounting feet on both sides that precisely snap into PCB board holes, significantly improving assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces; the handle damping is crisp and moderate, with strong detent feel across all four positions and precise positioning; internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio systems, mixing consoles, home appliances, medical instruments, and various PCB through-hole motherboards requiring four-position logic control. 2D/3D drawings and free sample requests are available.

This SS-22D03 straight handle miniature vertical 2-position toggle switch (Vertical Slide Switch SS-22D03 6 Pin 2P2T 2 Position Vertical Straight Handle) features a rugged design with "thickened fully enclosed metal shell + black anti-slip knurled straight handle + dual row 6 Pin vertical through-hole silver-plated terminals + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is double pole double throw (2P2T 2-position switching), providing dual-circuit 2-stage synchronous selection capability (e.g., "ON - OFF," "dual-channel power/signal synchronous switching"). The shell includes dedicated PCB reinforcement mounting feet on both sides that precisely snap into PCB through-holes, significantly enhancing assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces. The handle damping is crisp and moderate, with strong detent feel at both positions and precise positioning. Internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio systems, mixing consoles, household appliances, medical instruments, and various PCB through-hole motherboards requiring 2-position logic control. 2D/3D drawings and free sample request service are available.

This SS-22D28 high current straight handle mini toggle switch (Horizontal Right Angle Slide Switch SS-22D28 6 Pin 2P2T 3A High Current Metal Handle) adopts a reinforced design featuring a "fully wrapped metal thickened shell + textured metal cylindrical straight handle + dual row 6 Pin horizontal 90 degree long bent pin silver-plated terminals + red high-insulation engineering plastic base." The circuit configuration is double pole double throw (2P2T two-position switching), with a **rated load of up to 3A**, specifically optimized for PCB motherboard edge side-insert installation, deep panel shaft extension, and high current/high power dual-circuit synchronous control (such as simultaneous cut-off/connection of high current power supply positive and negative terminals, high-end audio power main switch, and high power switching for operating modes); the 90 degree horizontal long pin design greatly facilitates insertion and fixation when the enclosure panel has deeper space, providing excellent structural stability; the metal cylindrical handle offers outstanding tactile quality, crisp damping, and clear two-position detent feel; internally, high-precision thickened silver-plated contacts ensure low contact resistance, minimal temperature rise, and stable conduction performance. Widely used in high-power digital audio, instrumentation, household small appliances, and various PCB control motherboards requiring panel side shaft extension and 3A current synchronous switching. 2D/3D drawings and free sample request service are available.

This SS-22F04 low-current straight-handle miniature toggle switch (Vertical Slide Switch SS-22F04 6 Pin 2P2T 2-Position Low Current) features a design of "fully enclosed anti-corrosion metal shell + black anti-slip POM high straight handle + dual-row 6-pin vertical through-hole silver-plated terminals + PCB corner-bent fixing legs on both sides + yellow high-insulation engineering plastic base." The circuit configuration is double-pole double-throw (2P2T 2-position switching), **optimized specifically for low current (e.g., DC 12V 0.1A / DC 50V 0.3A) and micro-signal control**; the vertical through-hole pins combined with the bent legs through holes on both sides of the shell allow secure fixation onto the PCB motherboard, effectively absorbing push-pull and press forces; the black high straight handle provides crisp damping and clear 2-position detent feel; internally, high-precision silver-plated contacts ensure low contact resistance, stable signal conduction without drift. Widely used in portable audio, digital devices, small household appliances, instruments and meters, and various PCB control motherboards requiring vertical dual-channel synchronous signal/mode switching. 2D/3D drawings and free sample request service are available.

This SS-12D02 straight-handle miniature slide switch (Vertical Slide Switch SS-12D02 1P2T 3 Pin Through-Hole) features a design combining a "high-strength metal anti-corrosion housing + black POM engineering plastic straight handle + single-row 3-pin straight terminal pins + dual-side reinforced mounting legs." The circuit configuration is single-pole double-throw (1P2T, two-position ON-ON), enabling stable switching of a single power or signal line. The bracket positioning legs extending from both sides of the housing can be directly reflow-soldered onto the PCB, significantly absorbing lateral forces during toggle operation and protecting the 3 signal pins from stress concentration and solder detachment. The high-conductivity silver-plated contacts ensure smooth soldering and extremely low contact resistance. Widely used in digital toys, portable audio devices, small household appliances, medical instruments, and various PCB-mounted power control applications. 2D/3D drawings and free sample request services are available.

This SS-12D10 straight-handle miniature slide switch (Vertical Slide Switch SS-12D10 High Current 3A 1P2T 3 Pin Through-Hole) features a design of "thickened anti-corrosion metal housing + black anti-slip textured POM straight handle + single row 3-pin silver-plated straight terminal pins + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically optimized for power lines or strong-signal switching carrying up to 3A current; the anti-slip textured handle provides crisp damping and a strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals offer fast solder wetting and secure soldering. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, household small appliances, and various PCB mainboards requiring safe high-current switching. 2D/3D drawings and free sample service are available.

This SS-12D11 straight-handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12D11 High Current 3A 1P2T 3 Pin Through-Hole) features a "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + single-row 3-pin horizontal/right-angle silver-plated terminals + high-temperature-resistant high-current contact system" design. The circuit configuration is single-pole double-throw (1P2T 2-position ON-ON), optimized for power lines or strong-signal side switching carrying up to 3A current; the horizontal right-angle pins are ideal for mounting along the PCB edge for side operation, the anti-slip textured handle provides crisp damping and strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong solder joints. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample request service are available.

This SS-12D16 straight-handle miniature toggle switch (Panel Mount Slide Switch SS-12D16 High Current 3A 1P2T 3 Pin Solder Lug with Ears) features a design of "screw-mounting ears on both sides of the housing + black anti-slip textured POM straight handle + single-row 3-pin solder lug terminals with holes + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically designed for scenarios requiring panel hole mounting with screw fixation and 3A high-current flying-lead soldering. The ears on both sides can be securely fastened to the equipment chassis with screws, withstanding high toggle forces. The 3-pin terminals feature standard wire-through holes, allowing wires to be hooked through before soldering, greatly enhancing physical pull-out resistance and preventing wire detachment. The embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise. Widely used in high-power lighting fixtures, control cabinet panels, portable energy storage devices, household small appliances, and various hardware systems requiring panel-locked high-current switching. 2D/3D drawings and free sample request service are available.

This upgraded derivative model of SS-12D11, the SS-12D28 Straight Handle Mini Toggle Switch (Right Angle Slide Switch SS-12D28 High Current 3A 1P2T 3 Pin Long Pins), features a design of "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + eye-catching red high-insulation engineering plastic base + single row 3 Pin long bent pins 90 degree side insert silver-plated terminals + high-temperature resistant high-current contact system." The circuit configuration is single pole double throw (1P2T two position ON-ON), specifically optimized for withstanding up to 3A current and for power line side switching operations requiring extended pins for through-hole board mounting or bridging; the extended 90 degree bent pin design facilitates fitting along the PCB edge and provides more stable mechanical through-hole soldering support; the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong soldering reliability. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample requests are available.

This SS-12F23 straight handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12F23 Low Current 1P2T 5 Pin Through-Hole) features a design of "metal thickened anti-corrosion shell + black anti-slip textured POM straight handle + single row 3 Pin horizontal/right angle silver-plated terminals + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T 2 position ON-ON), specifically optimized for low current signal switching, logic control, and low power supply circuits; the horizontal right angle pins facilitate side operation when mounted along the PCB edge, and the anti-slip textured handle provides crisp damping with strong detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable signal transmission; terminals offer fast solder wetting and strong solder joints. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control boards. 2D/3D drawings and free sample request service are available.

This SS-12F24 straight handle miniature toggle switch (Vertical Slide Switch SS-12F24 1P2T 3 Pin DIP Straight Pins) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 3 Pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T two-position ON-ON), specifically optimized for vertical through-hole mounting on PCB mainboards, low-current signal switching, and low-power power supply circuits; the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control mainboards. 2D/3D drawings and free sample requests are available.

This SS-13D01 straight-handle miniature toggle switch (Vertical Slide Switch SS-13D01 1P3T 4 Pin DIP Straight Pins 3-Position) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 4-pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for vertical through-hole mounting on PCB motherboards and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear, distinct position feedback; internally, high-precision silver-plated contacts deliver low contact resistance and stable conduction performance. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control motherboards requiring 3-position function switching. 2D/3D drawings and free sample requests are available.

This SS-13F03 straight-handle miniature vertical 3-position slide switch (Vertical Slide Switch SS-13F03 4 Pin 1P3T 3 Position Straight Handle) features a rugged design with "thickened fully-enclosed metal shell + black anti-slip knurled straight handle + special offset dual-row 4-pin silver-plated terminals (front row: 1 common pin + rear row: 3 switching pins) + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), providing single-circuit 3-stage mode selection capability (e.g., "Off - Low - High," "3-stage audio tone adjustment," "3-position function switching"). The unique offset 1+3 pin layout greatly optimizes PCB trace routing and prevents reverse insertion during assembly. Both sides of the shell feature dedicated PCB reinforcement mounting feet that precisely snap into PCB mounting holes, significantly improving assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces. The handle damping is crisp and moderate, with strong detent feel across all three positions and precise positioning. Internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio equipment, mixing consoles, home appliances, medical instruments, and various PCB through-hole motherboards requiring 3-position logic control. 2D/3D drawings and free sample requests are available.

This SS-13F05 straight-handle high-current slide switch (Slide Switch SS-13F05 1P3T 3-Position Solder Lugs) features a rugged design combining a "white high-insulation flame-retardant engineering plastic housing + large smooth straight handle + solder lug terminals with holes at both ends + high-quality copper alloy silver-plated moving and fixed contacts." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for household appliances, power tools, and wire harness soldering connections, capable of withstanding high currents and frequent manual switching operations. The metal solder lugs with holes at both ends are very convenient for threading wires through for soldering or plug-in connections. The detent action is crisp with extremely clear positioning; the internal thick silver-plated contacts effectively reduce contact resistance, delivering excellent arc resistance and long service life. Widely used in electric fan speed adjustment, heater power switching, multi-stage lighting dimming, power tools, and various household and industrial equipment requiring 3-position wire harness switches. 2D/3D drawings and free sample requests are available.

This SS-13F24 straight handle mini toggle switch (Horizontal Right Angle Slide Switch SS-13F24 1P3T 4 Pin DIP 3-Position) features a design of "thickened metal anti-corrosion shell + black anti-slip textured POM straight handle + single row 4-Pin horizontal side-insert silver-plated terminals + PCB fold-angle reinforcement positioning feet on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole triple throw (1P3T 3-position switching), optimized for PCB motherboard edge side-insert mounting and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the horizontal side-insert pins combined with through-hole bent feet on both sides of the shell can be firmly locked onto the PCB board edge, effectively absorbing lateral toggle force and side pressure; the anti-slip textured handle provides crisp damping and clear, definite position detents; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control boards requiring side 3-position function switching. 2D/3D drawings and free sample requests are available.

This SS-14D01 straight handle miniature vertical four-position slide switch (Vertical Slide Switch SS-14D01 6 Pin 1P4T 4 Position Straight Handle) features a rugged design with "thickened fully enclosed metal shell + black anti-slip knurled straight handle + single row 6 Pin vertical DIP silver-plated terminals + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is single pole four throw (1P4T four-position switching), providing single-circuit 4-segment mode selection capability (such as "OFF - Position 1 - Position 2 - Position 3," "four-stage function switching"); the shell has dedicated PCB reinforcement mounting feet on both sides that precisely snap into PCB board holes, significantly improving assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces; the handle damping is crisp and moderate, with strong detent feel across all four positions and precise positioning; internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio systems, mixing consoles, home appliances, medical instruments, and various PCB through-hole motherboards requiring four-position logic control. 2D/3D drawings and free sample requests are available.

This SS-22D03 straight handle miniature vertical 2-position toggle switch (Vertical Slide Switch SS-22D03 6 Pin 2P2T 2 Position Vertical Straight Handle) features a rugged design with "thickened fully enclosed metal shell + black anti-slip knurled straight handle + dual row 6 Pin vertical through-hole silver-plated terminals + PCB reinforcement mounting feet on both sides of the shell + high-insulation high-temperature-resistant base." The circuit configuration is double pole double throw (2P2T 2-position switching), providing dual-circuit 2-stage synchronous selection capability (e.g., "ON - OFF," "dual-channel power/signal synchronous switching"). The shell includes dedicated PCB reinforcement mounting feet on both sides that precisely snap into PCB through-holes, significantly enhancing assembly stability during reflow and wave soldering as well as resistance to lateral push-pull forces. The handle damping is crisp and moderate, with strong detent feel at both positions and precise positioning. Internally, high-precision silver-plated contacts ensure low contact resistance and stable conduction. Widely used in portable audio systems, mixing consoles, household appliances, medical instruments, and various PCB through-hole motherboards requiring 2-position logic control. 2D/3D drawings and free sample request service are available.

This SS-22D28 high current straight handle mini toggle switch (Horizontal Right Angle Slide Switch SS-22D28 6 Pin 2P2T 3A High Current Metal Handle) adopts a reinforced design featuring a "fully wrapped metal thickened shell + textured metal cylindrical straight handle + dual row 6 Pin horizontal 90 degree long bent pin silver-plated terminals + red high-insulation engineering plastic base." The circuit configuration is double pole double throw (2P2T two-position switching), with a **rated load of up to 3A**, specifically optimized for PCB motherboard edge side-insert installation, deep panel shaft extension, and high current/high power dual-circuit synchronous control (such as simultaneous cut-off/connection of high current power supply positive and negative terminals, high-end audio power main switch, and high power switching for operating modes); the 90 degree horizontal long pin design greatly facilitates insertion and fixation when the enclosure panel has deeper space, providing excellent structural stability; the metal cylindrical handle offers outstanding tactile quality, crisp damping, and clear two-position detent feel; internally, high-precision thickened silver-plated contacts ensure low contact resistance, minimal temperature rise, and stable conduction performance. Widely used in high-power digital audio, instrumentation, household small appliances, and various PCB control motherboards requiring panel side shaft extension and 3A current synchronous switching. 2D/3D drawings and free sample request service are available.

This SS-22F04 low-current straight-handle miniature toggle switch (Vertical Slide Switch SS-22F04 6 Pin 2P2T 2-Position Low Current) features a design of "fully enclosed anti-corrosion metal shell + black anti-slip POM high straight handle + dual-row 6-pin vertical through-hole silver-plated terminals + PCB corner-bent fixing legs on both sides + yellow high-insulation engineering plastic base." The circuit configuration is double-pole double-throw (2P2T 2-position switching), **optimized specifically for low current (e.g., DC 12V 0.1A / DC 50V 0.3A) and micro-signal control**; the vertical through-hole pins combined with the bent legs through holes on both sides of the shell allow secure fixation onto the PCB motherboard, effectively absorbing push-pull and press forces; the black high straight handle provides crisp damping and clear 2-position detent feel; internally, high-precision silver-plated contacts ensure low contact resistance, stable signal conduction without drift. Widely used in portable audio, digital devices, small household appliances, instruments and meters, and various PCB control motherboards requiring vertical dual-channel synchronous signal/mode switching. 2D/3D drawings and free sample request service are available.