This 1.0mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, with a precise keyed slot design, and is made of insulating, flame-retardant, high-heat-resistant material. Specifically designed for miniature wire harness connections and high-density motherboards, it precisely matches imported components of the same specification (such as the JST SH 1.0 series). It supports a full range from 2Pin to 20Pin, and offers 2D/3D drawings and free samples upon request.

This 1.0mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure with an extremely low profile height, specifically designed for ultra-thin devices and side routing from the motherboard edge. It includes a precise keying slot and high-strength SMT mounting tabs on both sides, perfectly matching 1.0mm pitch terminal wire harnesses (comparable to the JST SH 1.0 horizontal SMT series). Available in full configurations from 2Pin to 20Pin, with drawings and free samples provided upon request.

This 1.5mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, combining compact size with strong current-carrying capacity (up to 2.0A). Equipped with a stable keyed guide slot and anti-vibration latch, it perfectly matches 1.5mm pitch crimp terminal wire harnesses (comparable to the JST ZH 1.5 series). Supports full specifications from 2Pin to 15Pin, with 2D/3D drawings and free samples available.

This 1.5mm pitch WAFER SMT header (vertical wire-to-board connector) adopts a 180-degree vertical SMT structure and is equipped with high-strength metal reinforcement solder tabs on both sides, significantly enhancing pull-out resistance and anti-peeling performance. Terminal coplanarity has been optimized for the SMT process, offering excellent reflow temperature resistance and superior blind-mating anti-mismatch performance. It is a full replacement for the JST ZH 1.5 vertical SMT series, supports 2Pin to 16Pin configurations, and provides 2D/3D CAD drawings and free samples upon request.

This 1.25mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, equipped with reinforced dual-side fixed metal pads and a precise keyed slot for misalignment prevention. It offers excellent SMT flatness and superior pull-out mechanical strength, perfectly matching 1.25mm pitch crimp terminal wire harnesses (comparable to Molex 53398 / MX1.25 series). Available in full specifications from 2Pin to 20Pin, with 2D/3D drawings and free samples provided.

This 1.25mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, equipped with a housing anti-vibration forward latch and wraparound dual-side metal mounting pads. While achieving high-density signal transmission, it offers excellent vibration resistance and anti-disconnection performance, perfectly matching 1.25mm pitch locking terminal cable assemblies (comparable to the JST GH 1.25 series). Supports 2Pin to 15Pin full specifications, with 2D/3D drawings and free samples available.

This 2.0mm pitch WAFER SMT header (wire-to-board connector) adopts a 180-degree vertical SMT structure, featuring strong current-carrying capacity (up to 3.0A) and high voltage-withstanding insulation performance. It is equipped with a precise anti-reverse keying slot and reinforced metal solder tabs on both sides, perfectly matching 2.0mm pitch crimp terminal wire harnesses (comparable to the JST PH 2.0 series). It supports full specifications from 2Pin to 16Pin, with 2D/3D CAD drawings and free samples available.

This 2.0mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure, combining high-current transmission capability (up to 3.0A) with an extremely low vertical stacking height. It is equipped with a precise keying guide groove and reinforced metal fixing tabs on both sides, effectively preventing lateral pull-off from PCB pads, and perfectly matching 2.0mm pitch crimp terminal housing wire harnesses (comparable to the JST PH 2.0 horizontal SMT series). Supports full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples available.

This 2.5mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, offering excellent current-carrying capacity (up to 4.0A) and high voltage-resistant insulation performance. Equipped with a robust polarization guide groove and reinforced metal solder tabs on both sides, it effectively prevents SMT peeling and perfectly matches 2.5mm pitch crimp terminal wire harnesses (comparable to the JST XH 2.5 series). Available in full specifications from 2Pin to 16Pin, with 2D/3D CAD drawings and free samples provided.

This 2.5mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure, combining strong current-carrying capacity (up to 4.0A) with an extremely low vertical stacking height. It is equipped with a precise keyed polarization guide slot and reinforced metal fixing tabs on both sides, effectively preventing lateral pull forces from tearing PCB pads, and perfectly matching 2.5mm pitch crimp terminal housing wire harnesses (comparable to the JST XH 2.5 horizontal SMT series). Available in full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples provided.

This 2.0mm pitch WAFER SMT header (horizontal locking wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure. The housing integrates a high-reliability anti-detachment positive friction lock, combining 3.0A current-carrying capacity with excellent vibration resistance. Paired with thickened metal fixing solder tabs on both sides, it effectively prevents lateral pulling from detaching the PCB pads and perfectly matches 2.0mm pitch locking crimp terminal housing wire harnesses (comparable to the JST PA 2.0 / SAN horizontal SMT locking series). Available in full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples provided.

This 1.0mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, with a precise keyed slot design, and is made of insulating, flame-retardant, high-heat-resistant material. Specifically designed for miniature wire harness connections and high-density motherboards, it precisely matches imported components of the same specification (such as the JST SH 1.0 series). It supports a full range from 2Pin to 20Pin, and offers 2D/3D drawings and free samples upon request.

This 1.0mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure with an extremely low profile height, specifically designed for ultra-thin devices and side routing from the motherboard edge. It includes a precise keying slot and high-strength SMT mounting tabs on both sides, perfectly matching 1.0mm pitch terminal wire harnesses (comparable to the JST SH 1.0 horizontal SMT series). Available in full configurations from 2Pin to 20Pin, with drawings and free samples provided upon request.

This 1.5mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, combining compact size with strong current-carrying capacity (up to 2.0A). Equipped with a stable keyed guide slot and anti-vibration latch, it perfectly matches 1.5mm pitch crimp terminal wire harnesses (comparable to the JST ZH 1.5 series). Supports full specifications from 2Pin to 15Pin, with 2D/3D drawings and free samples available.

This 1.5mm pitch WAFER SMT header (vertical wire-to-board connector) adopts a 180-degree vertical SMT structure and is equipped with high-strength metal reinforcement solder tabs on both sides, significantly enhancing pull-out resistance and anti-peeling performance. Terminal coplanarity has been optimized for the SMT process, offering excellent reflow temperature resistance and superior blind-mating anti-mismatch performance. It is a full replacement for the JST ZH 1.5 vertical SMT series, supports 2Pin to 16Pin configurations, and provides 2D/3D CAD drawings and free samples upon request.

This 1.25mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, equipped with reinforced dual-side fixed metal pads and a precise keyed slot for misalignment prevention. It offers excellent SMT flatness and superior pull-out mechanical strength, perfectly matching 1.25mm pitch crimp terminal wire harnesses (comparable to Molex 53398 / MX1.25 series). Available in full specifications from 2Pin to 20Pin, with 2D/3D drawings and free samples provided.

This 1.25mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, equipped with a housing anti-vibration forward latch and wraparound dual-side metal mounting pads. While achieving high-density signal transmission, it offers excellent vibration resistance and anti-disconnection performance, perfectly matching 1.25mm pitch locking terminal cable assemblies (comparable to the JST GH 1.25 series). Supports 2Pin to 15Pin full specifications, with 2D/3D drawings and free samples available.

This 2.0mm pitch WAFER SMT header (wire-to-board connector) adopts a 180-degree vertical SMT structure, featuring strong current-carrying capacity (up to 3.0A) and high voltage-withstanding insulation performance. It is equipped with a precise anti-reverse keying slot and reinforced metal solder tabs on both sides, perfectly matching 2.0mm pitch crimp terminal wire harnesses (comparable to the JST PH 2.0 series). It supports full specifications from 2Pin to 16Pin, with 2D/3D CAD drawings and free samples available.

This 2.0mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure, combining high-current transmission capability (up to 3.0A) with an extremely low vertical stacking height. It is equipped with a precise keying guide groove and reinforced metal fixing tabs on both sides, effectively preventing lateral pull-off from PCB pads, and perfectly matching 2.0mm pitch crimp terminal housing wire harnesses (comparable to the JST PH 2.0 horizontal SMT series). Supports full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples available.

This 2.5mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, offering excellent current-carrying capacity (up to 4.0A) and high voltage-resistant insulation performance. Equipped with a robust polarization guide groove and reinforced metal solder tabs on both sides, it effectively prevents SMT peeling and perfectly matches 2.5mm pitch crimp terminal wire harnesses (comparable to the JST XH 2.5 series). Available in full specifications from 2Pin to 16Pin, with 2D/3D CAD drawings and free samples provided.

This 2.5mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure, combining strong current-carrying capacity (up to 4.0A) with an extremely low vertical stacking height. It is equipped with a precise keyed polarization guide slot and reinforced metal fixing tabs on both sides, effectively preventing lateral pull forces from tearing PCB pads, and perfectly matching 2.5mm pitch crimp terminal housing wire harnesses (comparable to the JST XH 2.5 horizontal SMT series). Available in full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples provided.

This 2.0mm pitch WAFER SMT header (horizontal locking wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure. The housing integrates a high-reliability anti-detachment positive friction lock, combining 3.0A current-carrying capacity with excellent vibration resistance. Paired with thickened metal fixing solder tabs on both sides, it effectively prevents lateral pulling from detaching the PCB pads and perfectly matches 2.0mm pitch locking crimp terminal housing wire harnesses (comparable to the JST PA 2.0 / SAN horizontal SMT locking series). Available in full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples provided.

This 1.0mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, with a precise keyed slot design, and is made of insulating, flame-retardant, high-heat-resistant material. Specifically designed for miniature wire harness connections and high-density motherboards, it precisely matches imported components of the same specification (such as the JST SH 1.0 series). It supports a full range from 2Pin to 20Pin, and offers 2D/3D drawings and free samples upon request.

This 1.0mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure with an extremely low profile height, specifically designed for ultra-thin devices and side routing from the motherboard edge. It includes a precise keying slot and high-strength SMT mounting tabs on both sides, perfectly matching 1.0mm pitch terminal wire harnesses (comparable to the JST SH 1.0 horizontal SMT series). Available in full configurations from 2Pin to 20Pin, with drawings and free samples provided upon request.

This 1.5mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, combining compact size with strong current-carrying capacity (up to 2.0A). Equipped with a stable keyed guide slot and anti-vibration latch, it perfectly matches 1.5mm pitch crimp terminal wire harnesses (comparable to the JST ZH 1.5 series). Supports full specifications from 2Pin to 15Pin, with 2D/3D drawings and free samples available.

This 1.5mm pitch WAFER SMT header (vertical wire-to-board connector) adopts a 180-degree vertical SMT structure and is equipped with high-strength metal reinforcement solder tabs on both sides, significantly enhancing pull-out resistance and anti-peeling performance. Terminal coplanarity has been optimized for the SMT process, offering excellent reflow temperature resistance and superior blind-mating anti-mismatch performance. It is a full replacement for the JST ZH 1.5 vertical SMT series, supports 2Pin to 16Pin configurations, and provides 2D/3D CAD drawings and free samples upon request.

This 1.25mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, equipped with reinforced dual-side fixed metal pads and a precise keyed slot for misalignment prevention. It offers excellent SMT flatness and superior pull-out mechanical strength, perfectly matching 1.25mm pitch crimp terminal wire harnesses (comparable to Molex 53398 / MX1.25 series). Available in full specifications from 2Pin to 20Pin, with 2D/3D drawings and free samples provided.

This 1.25mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, equipped with a housing anti-vibration forward latch and wraparound dual-side metal mounting pads. While achieving high-density signal transmission, it offers excellent vibration resistance and anti-disconnection performance, perfectly matching 1.25mm pitch locking terminal cable assemblies (comparable to the JST GH 1.25 series). Supports 2Pin to 15Pin full specifications, with 2D/3D drawings and free samples available.

This 2.0mm pitch WAFER SMT header (wire-to-board connector) adopts a 180-degree vertical SMT structure, featuring strong current-carrying capacity (up to 3.0A) and high voltage-withstanding insulation performance. It is equipped with a precise anti-reverse keying slot and reinforced metal solder tabs on both sides, perfectly matching 2.0mm pitch crimp terminal wire harnesses (comparable to the JST PH 2.0 series). It supports full specifications from 2Pin to 16Pin, with 2D/3D CAD drawings and free samples available.

This 2.0mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure, combining high-current transmission capability (up to 3.0A) with an extremely low vertical stacking height. It is equipped with a precise keying guide groove and reinforced metal fixing tabs on both sides, effectively preventing lateral pull-off from PCB pads, and perfectly matching 2.0mm pitch crimp terminal housing wire harnesses (comparable to the JST PH 2.0 horizontal SMT series). Supports full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples available.

This 2.5mm pitch WAFER SMT header (wire-to-board connector) features a 180-degree vertical SMT structure, offering excellent current-carrying capacity (up to 4.0A) and high voltage-resistant insulation performance. Equipped with a robust polarization guide groove and reinforced metal solder tabs on both sides, it effectively prevents SMT peeling and perfectly matches 2.5mm pitch crimp terminal wire harnesses (comparable to the JST XH 2.5 series). Available in full specifications from 2Pin to 16Pin, with 2D/3D CAD drawings and free samples provided.

This 2.5mm pitch WAFER SMT header (horizontal wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure, combining strong current-carrying capacity (up to 4.0A) with an extremely low vertical stacking height. It is equipped with a precise keyed polarization guide slot and reinforced metal fixing tabs on both sides, effectively preventing lateral pull forces from tearing PCB pads, and perfectly matching 2.5mm pitch crimp terminal housing wire harnesses (comparable to the JST XH 2.5 horizontal SMT series). Available in full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples provided.

This 2.0mm pitch WAFER SMT header (horizontal locking wire-to-board connector) features a 90-degree side-entry (Right Angle SMT) structure. The housing integrates a high-reliability anti-detachment positive friction lock, combining 3.0A current-carrying capacity with excellent vibration resistance. Paired with thickened metal fixing solder tabs on both sides, it effectively prevents lateral pulling from detaching the PCB pads and perfectly matches 2.0mm pitch locking crimp terminal housing wire harnesses (comparable to the JST PA 2.0 / SAN horizontal SMT locking series). Available in full specifications from 2Pin to 16Pin, with 2D/3D drawings and free samples provided.