This 30mm ring illuminated latching metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 30mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC double pole double throw circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; featuring a double pole double throw (2NO2NC / 8-pin) wiring architecture, it can simultaneously control the on/off or signal switching of two independent circuits. It features latching (press once to lock and maintain contact / press again to reset and disconnect) functionality, and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof impact resistance, suitable for outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 30mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 30mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring illuminated latching metal push button switch features an industrial-grade precision design with a "full metal rugged housing + 28mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealed structure." It is specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments. It adopts a DPDT (2NO2NC / 8-pin) wiring architecture, enabling simultaneous control of two independent circuits for on/off or signal switching. It features latching functionality (press once to lock and maintain the connection / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, suitable for outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 28mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring-illuminated momentary single-pole metal push button switch features an industrial-grade precision design with an "all-metal rugged housing + 28mm standard mounting thread + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor devices, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a single-pole double-throw (1NO1NC / 5-pin: including 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary action (press to conduct / release for automatic spring-back reset), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily handling outdoor wind, rain, and harsh industrial conditions. 2D/3D drawings and free sample requests are available.

This 25mm ring illuminated latching double-pole metal button switch features an industrial-grade precision design combining a "full metal rugged housing + 25mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a DPDT (2NO2NC / 8-pin: 2 sets of normally open + 2 sets of normally closed + 2 lamp pins + 2 common pins) wiring architecture, capable of independently controlling two circuits simultaneously or performing logic-linked switching. It features latching functionality (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request services are provided.

This 25mm ring illuminated latching single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 25mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." It is specially crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 22mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 22mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically engineered for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine retrofitting. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 22mm ring illuminated momentary reset SPDT metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 22mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: including 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary reset function (Momentary, press to conduct / release to automatically spring back and reset), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request service are available.

This 19F high-profile ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19F convex/high-profile pressing surface + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealing structure." The high-profile (convex) design provides an extremely eye-catching visual effect and anti-misoperation blind-operation tactile feedback. The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), offering clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 LED pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching functionality (press once to lock and maintain conduction / press again to reset and disconnect), and the housing delivers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19F high-profile ring illuminated momentary reset SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19F convex/high-profile pressing surface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." The high-profile (convex) design provides excellent visual positioning and blind-operation pressing feel. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), offering clear equipment status indication in complex environments. It adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary reset function (Momentary, press to conduct / release to automatically spring back), and the housing offers IP67 waterproof and dustproof rating along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head non-illuminated latching single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19C all-metal flat head interface + 1NO1NC SPDT circuit + waterproof sealed structure." The non-illuminated design is specifically tailored for industrial control scenarios that require no light indication, low power consumption, long service life, and a minimalist metallic aesthetic. The switch adopts a single-pole double-throw (1NO1NC / 3 terminals: 1 common + 1 normally open + 1 normally closed) wiring architecture, enabling precise single-circuit on/off control or switching between normally open and normally closed signals. It features latching functionality (press once to lock and maintain the circuit, press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring illuminated latching DPDT metal push button switch adopts an industrial-grade precision design featuring a "full metal rugged housing + 19mm standard mounting hole thread + 19C flat head press interface + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a DPDT (2NO2NC / 8 pins: including 2 groups of common pins + 2 groups of normally open + 2 groups of normally closed + 2 groups of LED pins) wiring architecture, enabling simultaneous switching of two independent circuits or switching between normally open and normally closed signals (such as simultaneous disconnection of live and neutral wires / synchronized control of dual-channel signals). It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily coping with outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring-type power symbol illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting thread + 19C flat head press interface + dual LED illumination with ring and power symbol + 1NO1NC SPDT circuit + waterproof sealing structure." The switch button is engraved with the international standard power symbol and complemented by a ring-shaped illumination ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing extremely intuitive on/off status indication for high-end equipment. It adopts a SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 lamp pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock on / press again to reset off), and the housing offers IP67 waterproof and dustproof protection with IK10 explosion-proof and impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 30mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC double pole double throw circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; featuring a double pole double throw (2NO2NC / 8-pin) wiring architecture, it can simultaneously control the on/off or signal switching of two independent circuits. It features latching (press once to lock and maintain contact / press again to reset and disconnect) functionality, and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof impact resistance, suitable for outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 30mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 30mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring illuminated latching metal push button switch features an industrial-grade precision design with a "full metal rugged housing + 28mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealed structure." It is specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments. It adopts a DPDT (2NO2NC / 8-pin) wiring architecture, enabling simultaneous control of two independent circuits for on/off or signal switching. It features latching functionality (press once to lock and maintain the connection / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, suitable for outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 28mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring-illuminated momentary single-pole metal push button switch features an industrial-grade precision design with an "all-metal rugged housing + 28mm standard mounting thread + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor devices, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a single-pole double-throw (1NO1NC / 5-pin: including 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary action (press to conduct / release for automatic spring-back reset), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily handling outdoor wind, rain, and harsh industrial conditions. 2D/3D drawings and free sample requests are available.

This 25mm ring illuminated latching double-pole metal button switch features an industrial-grade precision design combining a "full metal rugged housing + 25mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a DPDT (2NO2NC / 8-pin: 2 sets of normally open + 2 sets of normally closed + 2 lamp pins + 2 common pins) wiring architecture, capable of independently controlling two circuits simultaneously or performing logic-linked switching. It features latching functionality (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request services are provided.

This 25mm ring illuminated latching single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 25mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." It is specially crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 22mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 22mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically engineered for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine retrofitting. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 22mm ring illuminated momentary reset SPDT metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 22mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: including 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary reset function (Momentary, press to conduct / release to automatically spring back and reset), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request service are available.

This 19F high-profile ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19F convex/high-profile pressing surface + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealing structure." The high-profile (convex) design provides an extremely eye-catching visual effect and anti-misoperation blind-operation tactile feedback. The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), offering clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 LED pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching functionality (press once to lock and maintain conduction / press again to reset and disconnect), and the housing delivers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19F high-profile ring illuminated momentary reset SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19F convex/high-profile pressing surface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." The high-profile (convex) design provides excellent visual positioning and blind-operation pressing feel. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), offering clear equipment status indication in complex environments. It adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary reset function (Momentary, press to conduct / release to automatically spring back), and the housing offers IP67 waterproof and dustproof rating along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head non-illuminated latching single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19C all-metal flat head interface + 1NO1NC SPDT circuit + waterproof sealed structure." The non-illuminated design is specifically tailored for industrial control scenarios that require no light indication, low power consumption, long service life, and a minimalist metallic aesthetic. The switch adopts a single-pole double-throw (1NO1NC / 3 terminals: 1 common + 1 normally open + 1 normally closed) wiring architecture, enabling precise single-circuit on/off control or switching between normally open and normally closed signals. It features latching functionality (press once to lock and maintain the circuit, press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring illuminated latching DPDT metal push button switch adopts an industrial-grade precision design featuring a "full metal rugged housing + 19mm standard mounting hole thread + 19C flat head press interface + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a DPDT (2NO2NC / 8 pins: including 2 groups of common pins + 2 groups of normally open + 2 groups of normally closed + 2 groups of LED pins) wiring architecture, enabling simultaneous switching of two independent circuits or switching between normally open and normally closed signals (such as simultaneous disconnection of live and neutral wires / synchronized control of dual-channel signals). It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily coping with outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring-type power symbol illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting thread + 19C flat head press interface + dual LED illumination with ring and power symbol + 1NO1NC SPDT circuit + waterproof sealing structure." The switch button is engraved with the international standard power symbol and complemented by a ring-shaped illumination ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing extremely intuitive on/off status indication for high-end equipment. It adopts a SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 lamp pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock on / press again to reset off), and the housing offers IP67 waterproof and dustproof protection with IK10 explosion-proof and impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 30mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC double pole double throw circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; featuring a double pole double throw (2NO2NC / 8-pin) wiring architecture, it can simultaneously control the on/off or signal switching of two independent circuits. It features latching (press once to lock and maintain contact / press again to reset and disconnect) functionality, and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof impact resistance, suitable for outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 30mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 30mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 30mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring illuminated latching metal push button switch features an industrial-grade precision design with a "full metal rugged housing + 28mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealed structure." It is specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments. It adopts a DPDT (2NO2NC / 8-pin) wiring architecture, enabling simultaneous control of two independent circuits for on/off or signal switching. It features latching functionality (press once to lock and maintain the connection / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, suitable for outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 28mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 28mm ring-illuminated momentary single-pole metal push button switch features an industrial-grade precision design with an "all-metal rugged housing + 28mm standard mounting thread + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor devices, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a single-pole double-throw (1NO1NC / 5-pin: including 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary action (press to conduct / release for automatic spring-back reset), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily handling outdoor wind, rain, and harsh industrial conditions. 2D/3D drawings and free sample requests are available.

This 25mm ring illuminated latching double-pole metal button switch features an industrial-grade precision design combining a "full metal rugged housing + 25mm standard mounting hole thread + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealing structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, high-end outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a DPDT (2NO2NC / 8-pin: 2 sets of normally open + 2 sets of normally closed + 2 lamp pins + 2 common pins) wiring architecture, capable of independently controlling two circuits simultaneously or performing logic-linked switching. It features latching functionality (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request services are provided.

This 25mm ring illuminated latching single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 25mm standard mounting thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." It is specially crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 22mm ring illuminated latching SPDT metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 22mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." Specifically engineered for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine retrofitting. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 22mm ring illuminated momentary reset SPDT metal push button switch features an industrial-grade precision design combining a "full metal rugged housing + 22mm standard mounting hole thread + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." Specifically crafted for high-quality industrial control cabinets, automation equipment, medical instruments, premium outdoor equipment, and vehicle/marine modifications. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: including 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary reset function (Momentary, press to conduct / release to automatically spring back and reset), and the housing offers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request service are available.

This 19F high-profile ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19F convex/high-profile pressing surface + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealing structure." The high-profile (convex) design provides an extremely eye-catching visual effect and anti-misoperation blind-operation tactile feedback. The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), offering clear equipment status indication in complex environments; it adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 LED pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching functionality (press once to lock and maintain conduction / press again to reset and disconnect), and the housing delivers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19F high-profile ring illuminated momentary reset SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19F convex/high-profile pressing surface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." The high-profile (convex) design provides excellent visual positioning and blind-operation pressing feel. The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), offering clear equipment status indication in complex environments. It adopts an SPDT (1NO1NC / 5-pin: 1 normally open + 1 normally closed + 2 lamp pins + 1 common pin) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features momentary reset function (Momentary, press to conduct / release to automatically spring back), and the housing offers IP67 waterproof and dustproof rating along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head non-illuminated latching single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting hole thread + 19C all-metal flat head interface + 1NO1NC SPDT circuit + waterproof sealed structure." The non-illuminated design is specifically tailored for industrial control scenarios that require no light indication, low power consumption, long service life, and a minimalist metallic aesthetic. The switch adopts a single-pole double-throw (1NO1NC / 3 terminals: 1 common + 1 normally open + 1 normally closed) wiring architecture, enabling precise single-circuit on/off control or switching between normally open and normally closed signals. It features latching functionality (press once to lock and maintain the circuit, press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring illuminated latching DPDT metal push button switch adopts an industrial-grade precision design featuring a "full metal rugged housing + 19mm standard mounting hole thread + 19C flat head press interface + ring LED illuminated ring + 2NO2NC DPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a DPDT (2NO2NC / 8 pins: including 2 groups of common pins + 2 groups of normally open + 2 groups of normally closed + 2 groups of LED pins) wiring architecture, enabling simultaneous switching of two independent circuits or switching between normally open and normally closed signals (such as simultaneous disconnection of live and neutral wires / synchronized control of dual-channel signals). It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily coping with outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring-type power symbol illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting thread + 19C flat head press interface + dual LED illumination with ring and power symbol + 1NO1NC SPDT circuit + waterproof sealing structure." The switch button is engraved with the international standard power symbol and complemented by a ring-shaped illumination ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing extremely intuitive on/off status indication for high-end equipment. It adopts a SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 lamp pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock on / press again to reset off), and the housing offers IP67 waterproof and dustproof protection with IK10 explosion-proof and impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.