This 5.8×5.8mm flat-top push button switch (model: SYCPB64L/N 180WJP) features a precision structure design of "5.8*5.8 compact square base + flat-top actuator button + metal side clips/positioning mounting feet on both sides + 180g high-quality tactile snap dome". It is specifically tailored for hardware terminals that have strict requirements on PCB area, require a clear tactile press feel, and demand extremely high resistance to lateral stress and peel strength on the button. It offers two operating modes: latching (L, press once to turn on / press again to turn off) and non-latching/reset (N, press to connect / release to reset), flexibly adapting to different circuit control needs. The two sides are equipped with dedicated metal fixing clips, which firmly bond with the PCB during SMT/DIP soldering, effectively dispersing the mechanical stress generated by frequent pressing and greatly enhancing the switch's pry resistance and durability. Widely used in smart home control panels, security monitoring equipment, consumer electronics, medical instruments, and various small control terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm high-profile through-hole push button switch (model: SYCPB60L/N LDIP series) features a precision structure design combining a "5.8×5.8 compact square base + extended high-profile operating plunger + elongated specially designed metal mounting bracket + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require passing through thicker enclosure panels, deep structural cavities, long press travel, and strict requirements for lateral stress resistance and mechanical mounting strength. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to conduct / release to reset), as well as two operating force options — 180g (standard crisp tactile feel) and 250g (premium anti-accidental-touch feel) — for customers to select as needed. The switch housing is equipped with an extended long metal mounting bracket on the side, which, after DIP through-hole wave soldering, forms a strong triangular support with the PCB and enclosure, effectively dispersing the mechanical stress caused by frequent pressing and completely resolving the common issues of wobbly high-profile buttons or cracked solder joints. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 8.5×8.5mm high-head through-hole push button switch (model: SYCPB85L/N 250) features a precision structural design combining a "classic 8.5×8.5mm square large base + high-head operating actuator + 6-pin DIP through-hole terminals + 250g high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, greater structural depth, and high demands on button tactile force and circuit switching reliability. Available in both latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset) action modes, it features a 6-pin multi-circuit design for flexible adaptation to different circuit control requirements. The 250g operating force provides very clear, crisp tactile feedback, effectively preventing accidental actuation. The 6-pin DIP vertical terminals bond firmly to the PCB after wave soldering, offering extremely high mechanical peel resistance. Widely used in medium and large household appliances, multimedia audio systems, security surveillance equipment, industrial control panels, and medical testing instruments. 2D/3D drawings and free sample requests are available.

This 7×7mm high-head through-hole push button switch (model: SYCPB70L/N 180/250 series) adopts a precision structure design of "7*7mm classic square base + high-head operating plunger + 6-pin DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, moderate structural space, and strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of high-head buttons being prone to wobbling. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm special high-profile through-hole push button switch (model: SYCPB63L/N 180/250 series) features a precision structure design of "5.8*5.8mm compact square base + special irregular/high-profile actuator with slot + 6-pin DIP through-hole terminals + high-quality tactile snap dome". It is specially tailored for hardware terminals that need to pass through special thickness enclosure panels, mate with specific housing button caps via snap-fit, and have strict requirements on button feel and circuit control reliability. It offers two action modes: latching (L, press once to switch on / press again to switch off) and non-latching/momentary (N, press to conduct / release to reset), and provides two actuation force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole terminals, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of wobbly irregular high-profile buttons. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm side push button switch with locating peg (model: SYCPB62L/N series) features a precision structural design combining a "5.8*5.8mm compact square base + horizontal 90-degree side-actuated pins + side mechanical locating pegs + high-quality tactile snap dome." It is specifically tailored for side-actuation, edge-panel openings, and hardware terminals with strict requirements for lateral push resistance. The switch base is specially designed with plastic locating pegs on the side, which precisely insert into PCB positioning holes during SMT/DIP soldering, effectively resisting tilt and shear stress caused by frequent side pressing, protecting solder joints from cracking. Two actuation modes are available: latching (L, push-on/push-off) and non-latching/momentary (N, press to conduct/release to reset). Two operating forces are supported: 180g (standard crisp tactile feel) and 250g (strong damping, anti-accidental-touch feel). Additionally, both high-profile (suitable for deep-cavity panels) and flat-top (suitable for flush-mounted panels) actuator styles are offered for customer selection. Widely used in small appliance side control panels, smart home devices, security equipment, industrial control instruments, and various side-press terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm SMD push button switch (Model: SYCPB64L/N S Series) features a precision structure design combining a "5.8×5.8mm compact square base + SMT mounting terminals + high-quality tactile snap dome." It is specifically tailored for high-density SMT automated assembly processes, slim enclosure panels, and hardware terminals with stringent pad mounting size requirements. The switch offers three terminal length/span specifications (1.9mm / 2.6mm / 3.5mm) to precisely match different PCB pad designs; it also supports two actuation forces—180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel)—as well as two actuator styles: high-profile (suitable for deep-cavity panels) and flat-profile (suitable for flush-mounted panels). In terms of circuit control, it provides two action modes: latching (L, press once to ON / press again to OFF) and non-latching/momentary (N, press to conduct / release to reset). The high-temperature-resistant engineering plastic material supports SMT reflow soldering processes. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various SMD terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top through-hole tactile switch (Model: SYCPB64L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + flat-top actuator + 6-Pin DIP through-hole pins + high-quality tactile metal dome." It is specifically tailored for compact panel assembly, flush-fit housing cap integration, and hardware terminals with strict requirements for key feel and circuit control reliability. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset), as well as two operating force options: 180g (standard crisp tactile feel) and 250g (strong damping anti-misoperation feel) for customers to select as needed. The switch is equipped with 6-Pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and flexible wiring. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various flat-enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm high shaft through-hole push button switch (Model: SYCPB60L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + high shaft actuator + DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for deep-cavity panel assembly, deep cap mating, and hardware terminals with strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with DIP through-hole pins, which form a sturdy mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and stable circuit conduction. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various terminals with high shaft structures. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top push button switch (model: SYCPB64L/N 180WJP) features a precision structure design of "5.8*5.8 compact square base + flat-top actuator button + metal side clips/positioning mounting feet on both sides + 180g high-quality tactile snap dome". It is specifically tailored for hardware terminals that have strict requirements on PCB area, require a clear tactile press feel, and demand extremely high resistance to lateral stress and peel strength on the button. It offers two operating modes: latching (L, press once to turn on / press again to turn off) and non-latching/reset (N, press to connect / release to reset), flexibly adapting to different circuit control needs. The two sides are equipped with dedicated metal fixing clips, which firmly bond with the PCB during SMT/DIP soldering, effectively dispersing the mechanical stress generated by frequent pressing and greatly enhancing the switch's pry resistance and durability. Widely used in smart home control panels, security monitoring equipment, consumer electronics, medical instruments, and various small control terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm high-profile through-hole push button switch (model: SYCPB60L/N LDIP series) features a precision structure design combining a "5.8×5.8 compact square base + extended high-profile operating plunger + elongated specially designed metal mounting bracket + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require passing through thicker enclosure panels, deep structural cavities, long press travel, and strict requirements for lateral stress resistance and mechanical mounting strength. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to conduct / release to reset), as well as two operating force options — 180g (standard crisp tactile feel) and 250g (premium anti-accidental-touch feel) — for customers to select as needed. The switch housing is equipped with an extended long metal mounting bracket on the side, which, after DIP through-hole wave soldering, forms a strong triangular support with the PCB and enclosure, effectively dispersing the mechanical stress caused by frequent pressing and completely resolving the common issues of wobbly high-profile buttons or cracked solder joints. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 8.5×8.5mm high-head through-hole push button switch (model: SYCPB85L/N 250) features a precision structural design combining a "classic 8.5×8.5mm square large base + high-head operating actuator + 6-pin DIP through-hole terminals + 250g high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, greater structural depth, and high demands on button tactile force and circuit switching reliability. Available in both latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset) action modes, it features a 6-pin multi-circuit design for flexible adaptation to different circuit control requirements. The 250g operating force provides very clear, crisp tactile feedback, effectively preventing accidental actuation. The 6-pin DIP vertical terminals bond firmly to the PCB after wave soldering, offering extremely high mechanical peel resistance. Widely used in medium and large household appliances, multimedia audio systems, security surveillance equipment, industrial control panels, and medical testing instruments. 2D/3D drawings and free sample requests are available.

This 7×7mm high-head through-hole push button switch (model: SYCPB70L/N 180/250 series) adopts a precision structure design of "7*7mm classic square base + high-head operating plunger + 6-pin DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, moderate structural space, and strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of high-head buttons being prone to wobbling. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm special high-profile through-hole push button switch (model: SYCPB63L/N 180/250 series) features a precision structure design of "5.8*5.8mm compact square base + special irregular/high-profile actuator with slot + 6-pin DIP through-hole terminals + high-quality tactile snap dome". It is specially tailored for hardware terminals that need to pass through special thickness enclosure panels, mate with specific housing button caps via snap-fit, and have strict requirements on button feel and circuit control reliability. It offers two action modes: latching (L, press once to switch on / press again to switch off) and non-latching/momentary (N, press to conduct / release to reset), and provides two actuation force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole terminals, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of wobbly irregular high-profile buttons. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm side push button switch with locating peg (model: SYCPB62L/N series) features a precision structural design combining a "5.8*5.8mm compact square base + horizontal 90-degree side-actuated pins + side mechanical locating pegs + high-quality tactile snap dome." It is specifically tailored for side-actuation, edge-panel openings, and hardware terminals with strict requirements for lateral push resistance. The switch base is specially designed with plastic locating pegs on the side, which precisely insert into PCB positioning holes during SMT/DIP soldering, effectively resisting tilt and shear stress caused by frequent side pressing, protecting solder joints from cracking. Two actuation modes are available: latching (L, push-on/push-off) and non-latching/momentary (N, press to conduct/release to reset). Two operating forces are supported: 180g (standard crisp tactile feel) and 250g (strong damping, anti-accidental-touch feel). Additionally, both high-profile (suitable for deep-cavity panels) and flat-top (suitable for flush-mounted panels) actuator styles are offered for customer selection. Widely used in small appliance side control panels, smart home devices, security equipment, industrial control instruments, and various side-press terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm SMD push button switch (Model: SYCPB64L/N S Series) features a precision structure design combining a "5.8×5.8mm compact square base + SMT mounting terminals + high-quality tactile snap dome." It is specifically tailored for high-density SMT automated assembly processes, slim enclosure panels, and hardware terminals with stringent pad mounting size requirements. The switch offers three terminal length/span specifications (1.9mm / 2.6mm / 3.5mm) to precisely match different PCB pad designs; it also supports two actuation forces—180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel)—as well as two actuator styles: high-profile (suitable for deep-cavity panels) and flat-profile (suitable for flush-mounted panels). In terms of circuit control, it provides two action modes: latching (L, press once to ON / press again to OFF) and non-latching/momentary (N, press to conduct / release to reset). The high-temperature-resistant engineering plastic material supports SMT reflow soldering processes. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various SMD terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top through-hole tactile switch (Model: SYCPB64L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + flat-top actuator + 6-Pin DIP through-hole pins + high-quality tactile metal dome." It is specifically tailored for compact panel assembly, flush-fit housing cap integration, and hardware terminals with strict requirements for key feel and circuit control reliability. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset), as well as two operating force options: 180g (standard crisp tactile feel) and 250g (strong damping anti-misoperation feel) for customers to select as needed. The switch is equipped with 6-Pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and flexible wiring. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various flat-enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm high shaft through-hole push button switch (Model: SYCPB60L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + high shaft actuator + DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for deep-cavity panel assembly, deep cap mating, and hardware terminals with strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with DIP through-hole pins, which form a sturdy mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and stable circuit conduction. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various terminals with high shaft structures. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top push button switch (model: SYCPB64L/N 180WJP) features a precision structure design of "5.8*5.8 compact square base + flat-top actuator button + metal side clips/positioning mounting feet on both sides + 180g high-quality tactile snap dome". It is specifically tailored for hardware terminals that have strict requirements on PCB area, require a clear tactile press feel, and demand extremely high resistance to lateral stress and peel strength on the button. It offers two operating modes: latching (L, press once to turn on / press again to turn off) and non-latching/reset (N, press to connect / release to reset), flexibly adapting to different circuit control needs. The two sides are equipped with dedicated metal fixing clips, which firmly bond with the PCB during SMT/DIP soldering, effectively dispersing the mechanical stress generated by frequent pressing and greatly enhancing the switch's pry resistance and durability. Widely used in smart home control panels, security monitoring equipment, consumer electronics, medical instruments, and various small control terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm high-profile through-hole push button switch (model: SYCPB60L/N LDIP series) features a precision structure design combining a "5.8×5.8 compact square base + extended high-profile operating plunger + elongated specially designed metal mounting bracket + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require passing through thicker enclosure panels, deep structural cavities, long press travel, and strict requirements for lateral stress resistance and mechanical mounting strength. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to conduct / release to reset), as well as two operating force options — 180g (standard crisp tactile feel) and 250g (premium anti-accidental-touch feel) — for customers to select as needed. The switch housing is equipped with an extended long metal mounting bracket on the side, which, after DIP through-hole wave soldering, forms a strong triangular support with the PCB and enclosure, effectively dispersing the mechanical stress caused by frequent pressing and completely resolving the common issues of wobbly high-profile buttons or cracked solder joints. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 8.5×8.5mm high-head through-hole push button switch (model: SYCPB85L/N 250) features a precision structural design combining a "classic 8.5×8.5mm square large base + high-head operating actuator + 6-pin DIP through-hole terminals + 250g high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, greater structural depth, and high demands on button tactile force and circuit switching reliability. Available in both latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset) action modes, it features a 6-pin multi-circuit design for flexible adaptation to different circuit control requirements. The 250g operating force provides very clear, crisp tactile feedback, effectively preventing accidental actuation. The 6-pin DIP vertical terminals bond firmly to the PCB after wave soldering, offering extremely high mechanical peel resistance. Widely used in medium and large household appliances, multimedia audio systems, security surveillance equipment, industrial control panels, and medical testing instruments. 2D/3D drawings and free sample requests are available.

This 7×7mm high-head through-hole push button switch (model: SYCPB70L/N 180/250 series) adopts a precision structure design of "7*7mm classic square base + high-head operating plunger + 6-pin DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, moderate structural space, and strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of high-head buttons being prone to wobbling. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm special high-profile through-hole push button switch (model: SYCPB63L/N 180/250 series) features a precision structure design of "5.8*5.8mm compact square base + special irregular/high-profile actuator with slot + 6-pin DIP through-hole terminals + high-quality tactile snap dome". It is specially tailored for hardware terminals that need to pass through special thickness enclosure panels, mate with specific housing button caps via snap-fit, and have strict requirements on button feel and circuit control reliability. It offers two action modes: latching (L, press once to switch on / press again to switch off) and non-latching/momentary (N, press to conduct / release to reset), and provides two actuation force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole terminals, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of wobbly irregular high-profile buttons. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm side push button switch with locating peg (model: SYCPB62L/N series) features a precision structural design combining a "5.8*5.8mm compact square base + horizontal 90-degree side-actuated pins + side mechanical locating pegs + high-quality tactile snap dome." It is specifically tailored for side-actuation, edge-panel openings, and hardware terminals with strict requirements for lateral push resistance. The switch base is specially designed with plastic locating pegs on the side, which precisely insert into PCB positioning holes during SMT/DIP soldering, effectively resisting tilt and shear stress caused by frequent side pressing, protecting solder joints from cracking. Two actuation modes are available: latching (L, push-on/push-off) and non-latching/momentary (N, press to conduct/release to reset). Two operating forces are supported: 180g (standard crisp tactile feel) and 250g (strong damping, anti-accidental-touch feel). Additionally, both high-profile (suitable for deep-cavity panels) and flat-top (suitable for flush-mounted panels) actuator styles are offered for customer selection. Widely used in small appliance side control panels, smart home devices, security equipment, industrial control instruments, and various side-press terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm SMD push button switch (Model: SYCPB64L/N S Series) features a precision structure design combining a "5.8×5.8mm compact square base + SMT mounting terminals + high-quality tactile snap dome." It is specifically tailored for high-density SMT automated assembly processes, slim enclosure panels, and hardware terminals with stringent pad mounting size requirements. The switch offers three terminal length/span specifications (1.9mm / 2.6mm / 3.5mm) to precisely match different PCB pad designs; it also supports two actuation forces—180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel)—as well as two actuator styles: high-profile (suitable for deep-cavity panels) and flat-profile (suitable for flush-mounted panels). In terms of circuit control, it provides two action modes: latching (L, press once to ON / press again to OFF) and non-latching/momentary (N, press to conduct / release to reset). The high-temperature-resistant engineering plastic material supports SMT reflow soldering processes. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various SMD terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top through-hole tactile switch (Model: SYCPB64L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + flat-top actuator + 6-Pin DIP through-hole pins + high-quality tactile metal dome." It is specifically tailored for compact panel assembly, flush-fit housing cap integration, and hardware terminals with strict requirements for key feel and circuit control reliability. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset), as well as two operating force options: 180g (standard crisp tactile feel) and 250g (strong damping anti-misoperation feel) for customers to select as needed. The switch is equipped with 6-Pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and flexible wiring. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various flat-enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm high shaft through-hole push button switch (Model: SYCPB60L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + high shaft actuator + DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for deep-cavity panel assembly, deep cap mating, and hardware terminals with strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with DIP through-hole pins, which form a sturdy mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and stable circuit conduction. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various terminals with high shaft structures. 2D/3D drawings and free sample requests are available.