This 8.5×8.5mm high-head through-hole push button switch (model: SYCPB85L/N 250) features a precision structural design combining a "classic 8.5×8.5mm square large base + high-head operating actuator + 6-pin DIP through-hole terminals + 250g high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, greater structural depth, and high demands on button tactile force and circuit switching reliability. Available in both latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset) action modes, it features a 6-pin multi-circuit design for flexible adaptation to different circuit control requirements. The 250g operating force provides very clear, crisp tactile feedback, effectively preventing accidental actuation. The 6-pin DIP vertical terminals bond firmly to the PCB after wave soldering, offering extremely high mechanical peel resistance. Widely used in medium and large household appliances, multimedia audio systems, security surveillance equipment, industrial control panels, and medical testing instruments. 2D/3D drawings and free sample requests are available.

This 7×7mm high-head through-hole push button switch (model: SYCPB70L/N 180/250 series) adopts a precision structure design of "7*7mm classic square base + high-head operating plunger + 6-pin DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, moderate structural space, and strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of high-head buttons being prone to wobbling. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm special high-profile through-hole push button switch (model: SYCPB63L/N 180/250 series) features a precision structure design of "5.8*5.8mm compact square base + special irregular/high-profile actuator with slot + 6-pin DIP through-hole terminals + high-quality tactile snap dome". It is specially tailored for hardware terminals that need to pass through special thickness enclosure panels, mate with specific housing button caps via snap-fit, and have strict requirements on button feel and circuit control reliability. It offers two action modes: latching (L, press once to switch on / press again to switch off) and non-latching/momentary (N, press to conduct / release to reset), and provides two actuation force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole terminals, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of wobbly irregular high-profile buttons. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm side push button switch with locating peg (model: SYCPB62L/N series) features a precision structural design combining a "5.8*5.8mm compact square base + horizontal 90-degree side-actuated pins + side mechanical locating pegs + high-quality tactile snap dome." It is specifically tailored for side-actuation, edge-panel openings, and hardware terminals with strict requirements for lateral push resistance. The switch base is specially designed with plastic locating pegs on the side, which precisely insert into PCB positioning holes during SMT/DIP soldering, effectively resisting tilt and shear stress caused by frequent side pressing, protecting solder joints from cracking. Two actuation modes are available: latching (L, push-on/push-off) and non-latching/momentary (N, press to conduct/release to reset). Two operating forces are supported: 180g (standard crisp tactile feel) and 250g (strong damping, anti-accidental-touch feel). Additionally, both high-profile (suitable for deep-cavity panels) and flat-top (suitable for flush-mounted panels) actuator styles are offered for customer selection. Widely used in small appliance side control panels, smart home devices, security equipment, industrial control instruments, and various side-press terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm SMD push button switch (Model: SYCPB64L/N S Series) features a precision structure design combining a "5.8×5.8mm compact square base + SMT mounting terminals + high-quality tactile snap dome." It is specifically tailored for high-density SMT automated assembly processes, slim enclosure panels, and hardware terminals with stringent pad mounting size requirements. The switch offers three terminal length/span specifications (1.9mm / 2.6mm / 3.5mm) to precisely match different PCB pad designs; it also supports two actuation forces—180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel)—as well as two actuator styles: high-profile (suitable for deep-cavity panels) and flat-profile (suitable for flush-mounted panels). In terms of circuit control, it provides two action modes: latching (L, press once to ON / press again to OFF) and non-latching/momentary (N, press to conduct / release to reset). The high-temperature-resistant engineering plastic material supports SMT reflow soldering processes. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various SMD terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top through-hole tactile switch (Model: SYCPB64L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + flat-top actuator + 6-Pin DIP through-hole pins + high-quality tactile metal dome." It is specifically tailored for compact panel assembly, flush-fit housing cap integration, and hardware terminals with strict requirements for key feel and circuit control reliability. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset), as well as two operating force options: 180g (standard crisp tactile feel) and 250g (strong damping anti-misoperation feel) for customers to select as needed. The switch is equipped with 6-Pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and flexible wiring. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various flat-enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm high shaft through-hole push button switch (Model: SYCPB60L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + high shaft actuator + DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for deep-cavity panel assembly, deep cap mating, and hardware terminals with strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with DIP through-hole pins, which form a sturdy mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and stable circuit conduction. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various terminals with high shaft structures. 2D/3D drawings and free sample requests are available.

This SS-12D02 straight-handle miniature slide switch (Vertical Slide Switch SS-12D02 1P2T 3 Pin Through-Hole) features a design combining a "high-strength metal anti-corrosion housing + black POM engineering plastic straight handle + single-row 3-pin straight terminal pins + dual-side reinforced mounting legs." The circuit configuration is single-pole double-throw (1P2T, two-position ON-ON), enabling stable switching of a single power or signal line. The bracket positioning legs extending from both sides of the housing can be directly reflow-soldered onto the PCB, significantly absorbing lateral forces during toggle operation and protecting the 3 signal pins from stress concentration and solder detachment. The high-conductivity silver-plated contacts ensure smooth soldering and extremely low contact resistance. Widely used in digital toys, portable audio devices, small household appliances, medical instruments, and various PCB-mounted power control applications. 2D/3D drawings and free sample request services are available.

This SS-12D10 straight-handle miniature slide switch (Vertical Slide Switch SS-12D10 High Current 3A 1P2T 3 Pin Through-Hole) features a design of "thickened anti-corrosion metal housing + black anti-slip textured POM straight handle + single row 3-pin silver-plated straight terminal pins + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically optimized for power lines or strong-signal switching carrying up to 3A current; the anti-slip textured handle provides crisp damping and a strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals offer fast solder wetting and secure soldering. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, household small appliances, and various PCB mainboards requiring safe high-current switching. 2D/3D drawings and free sample service are available.

This SS-12D11 straight-handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12D11 High Current 3A 1P2T 3 Pin Through-Hole) features a "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + single-row 3-pin horizontal/right-angle silver-plated terminals + high-temperature-resistant high-current contact system" design. The circuit configuration is single-pole double-throw (1P2T 2-position ON-ON), optimized for power lines or strong-signal side switching carrying up to 3A current; the horizontal right-angle pins are ideal for mounting along the PCB edge for side operation, the anti-slip textured handle provides crisp damping and strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong solder joints. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample request service are available.

This SS-12D16 straight-handle miniature toggle switch (Panel Mount Slide Switch SS-12D16 High Current 3A 1P2T 3 Pin Solder Lug with Ears) features a design of "screw-mounting ears on both sides of the housing + black anti-slip textured POM straight handle + single-row 3-pin solder lug terminals with holes + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically designed for scenarios requiring panel hole mounting with screw fixation and 3A high-current flying-lead soldering. The ears on both sides can be securely fastened to the equipment chassis with screws, withstanding high toggle forces. The 3-pin terminals feature standard wire-through holes, allowing wires to be hooked through before soldering, greatly enhancing physical pull-out resistance and preventing wire detachment. The embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise. Widely used in high-power lighting fixtures, control cabinet panels, portable energy storage devices, household small appliances, and various hardware systems requiring panel-locked high-current switching. 2D/3D drawings and free sample request service are available.

This upgraded derivative model of SS-12D11, the SS-12D28 Straight Handle Mini Toggle Switch (Right Angle Slide Switch SS-12D28 High Current 3A 1P2T 3 Pin Long Pins), features a design of "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + eye-catching red high-insulation engineering plastic base + single row 3 Pin long bent pins 90 degree side insert silver-plated terminals + high-temperature resistant high-current contact system." The circuit configuration is single pole double throw (1P2T two position ON-ON), specifically optimized for withstanding up to 3A current and for power line side switching operations requiring extended pins for through-hole board mounting or bridging; the extended 90 degree bent pin design facilitates fitting along the PCB edge and provides more stable mechanical through-hole soldering support; the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong soldering reliability. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample requests are available.

This SS-12F23 straight handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12F23 Low Current 1P2T 5 Pin Through-Hole) features a design of "metal thickened anti-corrosion shell + black anti-slip textured POM straight handle + single row 3 Pin horizontal/right angle silver-plated terminals + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T 2 position ON-ON), specifically optimized for low current signal switching, logic control, and low power supply circuits; the horizontal right angle pins facilitate side operation when mounted along the PCB edge, and the anti-slip textured handle provides crisp damping with strong detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable signal transmission; terminals offer fast solder wetting and strong solder joints. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control boards. 2D/3D drawings and free sample request service are available.

This SS-12F24 straight handle miniature toggle switch (Vertical Slide Switch SS-12F24 1P2T 3 Pin DIP Straight Pins) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 3 Pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T two-position ON-ON), specifically optimized for vertical through-hole mounting on PCB mainboards, low-current signal switching, and low-power power supply circuits; the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control mainboards. 2D/3D drawings and free sample requests are available.

This SS-13D01 straight-handle miniature toggle switch (Vertical Slide Switch SS-13D01 1P3T 4 Pin DIP Straight Pins 3-Position) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 4-pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for vertical through-hole mounting on PCB motherboards and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear, distinct position feedback; internally, high-precision silver-plated contacts deliver low contact resistance and stable conduction performance. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control motherboards requiring 3-position function switching. 2D/3D drawings and free sample requests are available.

This 8.5×8.5mm high-head through-hole push button switch (model: SYCPB85L/N 250) features a precision structural design combining a "classic 8.5×8.5mm square large base + high-head operating actuator + 6-pin DIP through-hole terminals + 250g high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, greater structural depth, and high demands on button tactile force and circuit switching reliability. Available in both latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset) action modes, it features a 6-pin multi-circuit design for flexible adaptation to different circuit control requirements. The 250g operating force provides very clear, crisp tactile feedback, effectively preventing accidental actuation. The 6-pin DIP vertical terminals bond firmly to the PCB after wave soldering, offering extremely high mechanical peel resistance. Widely used in medium and large household appliances, multimedia audio systems, security surveillance equipment, industrial control panels, and medical testing instruments. 2D/3D drawings and free sample requests are available.

This 7×7mm high-head through-hole push button switch (model: SYCPB70L/N 180/250 series) adopts a precision structure design of "7*7mm classic square base + high-head operating plunger + 6-pin DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, moderate structural space, and strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of high-head buttons being prone to wobbling. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm special high-profile through-hole push button switch (model: SYCPB63L/N 180/250 series) features a precision structure design of "5.8*5.8mm compact square base + special irregular/high-profile actuator with slot + 6-pin DIP through-hole terminals + high-quality tactile snap dome". It is specially tailored for hardware terminals that need to pass through special thickness enclosure panels, mate with specific housing button caps via snap-fit, and have strict requirements on button feel and circuit control reliability. It offers two action modes: latching (L, press once to switch on / press again to switch off) and non-latching/momentary (N, press to conduct / release to reset), and provides two actuation force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole terminals, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of wobbly irregular high-profile buttons. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm side push button switch with locating peg (model: SYCPB62L/N series) features a precision structural design combining a "5.8*5.8mm compact square base + horizontal 90-degree side-actuated pins + side mechanical locating pegs + high-quality tactile snap dome." It is specifically tailored for side-actuation, edge-panel openings, and hardware terminals with strict requirements for lateral push resistance. The switch base is specially designed with plastic locating pegs on the side, which precisely insert into PCB positioning holes during SMT/DIP soldering, effectively resisting tilt and shear stress caused by frequent side pressing, protecting solder joints from cracking. Two actuation modes are available: latching (L, push-on/push-off) and non-latching/momentary (N, press to conduct/release to reset). Two operating forces are supported: 180g (standard crisp tactile feel) and 250g (strong damping, anti-accidental-touch feel). Additionally, both high-profile (suitable for deep-cavity panels) and flat-top (suitable for flush-mounted panels) actuator styles are offered for customer selection. Widely used in small appliance side control panels, smart home devices, security equipment, industrial control instruments, and various side-press terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm SMD push button switch (Model: SYCPB64L/N S Series) features a precision structure design combining a "5.8×5.8mm compact square base + SMT mounting terminals + high-quality tactile snap dome." It is specifically tailored for high-density SMT automated assembly processes, slim enclosure panels, and hardware terminals with stringent pad mounting size requirements. The switch offers three terminal length/span specifications (1.9mm / 2.6mm / 3.5mm) to precisely match different PCB pad designs; it also supports two actuation forces—180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel)—as well as two actuator styles: high-profile (suitable for deep-cavity panels) and flat-profile (suitable for flush-mounted panels). In terms of circuit control, it provides two action modes: latching (L, press once to ON / press again to OFF) and non-latching/momentary (N, press to conduct / release to reset). The high-temperature-resistant engineering plastic material supports SMT reflow soldering processes. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various SMD terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top through-hole tactile switch (Model: SYCPB64L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + flat-top actuator + 6-Pin DIP through-hole pins + high-quality tactile metal dome." It is specifically tailored for compact panel assembly, flush-fit housing cap integration, and hardware terminals with strict requirements for key feel and circuit control reliability. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset), as well as two operating force options: 180g (standard crisp tactile feel) and 250g (strong damping anti-misoperation feel) for customers to select as needed. The switch is equipped with 6-Pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and flexible wiring. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various flat-enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm high shaft through-hole push button switch (Model: SYCPB60L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + high shaft actuator + DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for deep-cavity panel assembly, deep cap mating, and hardware terminals with strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with DIP through-hole pins, which form a sturdy mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and stable circuit conduction. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various terminals with high shaft structures. 2D/3D drawings and free sample requests are available.

This SS-12D02 straight-handle miniature slide switch (Vertical Slide Switch SS-12D02 1P2T 3 Pin Through-Hole) features a design combining a "high-strength metal anti-corrosion housing + black POM engineering plastic straight handle + single-row 3-pin straight terminal pins + dual-side reinforced mounting legs." The circuit configuration is single-pole double-throw (1P2T, two-position ON-ON), enabling stable switching of a single power or signal line. The bracket positioning legs extending from both sides of the housing can be directly reflow-soldered onto the PCB, significantly absorbing lateral forces during toggle operation and protecting the 3 signal pins from stress concentration and solder detachment. The high-conductivity silver-plated contacts ensure smooth soldering and extremely low contact resistance. Widely used in digital toys, portable audio devices, small household appliances, medical instruments, and various PCB-mounted power control applications. 2D/3D drawings and free sample request services are available.

This SS-12D10 straight-handle miniature slide switch (Vertical Slide Switch SS-12D10 High Current 3A 1P2T 3 Pin Through-Hole) features a design of "thickened anti-corrosion metal housing + black anti-slip textured POM straight handle + single row 3-pin silver-plated straight terminal pins + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically optimized for power lines or strong-signal switching carrying up to 3A current; the anti-slip textured handle provides crisp damping and a strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals offer fast solder wetting and secure soldering. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, household small appliances, and various PCB mainboards requiring safe high-current switching. 2D/3D drawings and free sample service are available.

This SS-12D11 straight-handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12D11 High Current 3A 1P2T 3 Pin Through-Hole) features a "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + single-row 3-pin horizontal/right-angle silver-plated terminals + high-temperature-resistant high-current contact system" design. The circuit configuration is single-pole double-throw (1P2T 2-position ON-ON), optimized for power lines or strong-signal side switching carrying up to 3A current; the horizontal right-angle pins are ideal for mounting along the PCB edge for side operation, the anti-slip textured handle provides crisp damping and strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong solder joints. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample request service are available.

This SS-12D16 straight-handle miniature toggle switch (Panel Mount Slide Switch SS-12D16 High Current 3A 1P2T 3 Pin Solder Lug with Ears) features a design of "screw-mounting ears on both sides of the housing + black anti-slip textured POM straight handle + single-row 3-pin solder lug terminals with holes + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically designed for scenarios requiring panel hole mounting with screw fixation and 3A high-current flying-lead soldering. The ears on both sides can be securely fastened to the equipment chassis with screws, withstanding high toggle forces. The 3-pin terminals feature standard wire-through holes, allowing wires to be hooked through before soldering, greatly enhancing physical pull-out resistance and preventing wire detachment. The embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise. Widely used in high-power lighting fixtures, control cabinet panels, portable energy storage devices, household small appliances, and various hardware systems requiring panel-locked high-current switching. 2D/3D drawings and free sample request service are available.

This upgraded derivative model of SS-12D11, the SS-12D28 Straight Handle Mini Toggle Switch (Right Angle Slide Switch SS-12D28 High Current 3A 1P2T 3 Pin Long Pins), features a design of "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + eye-catching red high-insulation engineering plastic base + single row 3 Pin long bent pins 90 degree side insert silver-plated terminals + high-temperature resistant high-current contact system." The circuit configuration is single pole double throw (1P2T two position ON-ON), specifically optimized for withstanding up to 3A current and for power line side switching operations requiring extended pins for through-hole board mounting or bridging; the extended 90 degree bent pin design facilitates fitting along the PCB edge and provides more stable mechanical through-hole soldering support; the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong soldering reliability. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample requests are available.

This SS-12F23 straight handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12F23 Low Current 1P2T 5 Pin Through-Hole) features a design of "metal thickened anti-corrosion shell + black anti-slip textured POM straight handle + single row 3 Pin horizontal/right angle silver-plated terminals + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T 2 position ON-ON), specifically optimized for low current signal switching, logic control, and low power supply circuits; the horizontal right angle pins facilitate side operation when mounted along the PCB edge, and the anti-slip textured handle provides crisp damping with strong detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable signal transmission; terminals offer fast solder wetting and strong solder joints. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control boards. 2D/3D drawings and free sample request service are available.

This SS-12F24 straight handle miniature toggle switch (Vertical Slide Switch SS-12F24 1P2T 3 Pin DIP Straight Pins) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 3 Pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T two-position ON-ON), specifically optimized for vertical through-hole mounting on PCB mainboards, low-current signal switching, and low-power power supply circuits; the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control mainboards. 2D/3D drawings and free sample requests are available.

This SS-13D01 straight-handle miniature toggle switch (Vertical Slide Switch SS-13D01 1P3T 4 Pin DIP Straight Pins 3-Position) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 4-pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for vertical through-hole mounting on PCB motherboards and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear, distinct position feedback; internally, high-precision silver-plated contacts deliver low contact resistance and stable conduction performance. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control motherboards requiring 3-position function switching. 2D/3D drawings and free sample requests are available.

This 8.5×8.5mm high-head through-hole push button switch (model: SYCPB85L/N 250) features a precision structural design combining a "classic 8.5×8.5mm square large base + high-head operating actuator + 6-pin DIP through-hole terminals + 250g high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, greater structural depth, and high demands on button tactile force and circuit switching reliability. Available in both latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset) action modes, it features a 6-pin multi-circuit design for flexible adaptation to different circuit control requirements. The 250g operating force provides very clear, crisp tactile feedback, effectively preventing accidental actuation. The 6-pin DIP vertical terminals bond firmly to the PCB after wave soldering, offering extremely high mechanical peel resistance. Widely used in medium and large household appliances, multimedia audio systems, security surveillance equipment, industrial control panels, and medical testing instruments. 2D/3D drawings and free sample requests are available.

This 7×7mm high-head through-hole push button switch (model: SYCPB70L/N 180/250 series) adopts a precision structure design of "7*7mm classic square base + high-head operating plunger + 6-pin DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for hardware terminals that require penetration through thicker enclosure panels, moderate structural space, and strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of high-head buttons being prone to wobbling. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm special high-profile through-hole push button switch (model: SYCPB63L/N 180/250 series) features a precision structure design of "5.8*5.8mm compact square base + special irregular/high-profile actuator with slot + 6-pin DIP through-hole terminals + high-quality tactile snap dome". It is specially tailored for hardware terminals that need to pass through special thickness enclosure panels, mate with specific housing button caps via snap-fit, and have strict requirements on button feel and circuit control reliability. It offers two action modes: latching (L, press once to switch on / press again to switch off) and non-latching/momentary (N, press to conduct / release to reset), and provides two actuation force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with 6-pin DIP through-hole terminals, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing and completely solving the problem of wobbly irregular high-profile buttons. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various deep-cavity enclosure terminals. 2D/3D drawings and free sample request service are available.

This 5.8×5.8mm side push button switch with locating peg (model: SYCPB62L/N series) features a precision structural design combining a "5.8*5.8mm compact square base + horizontal 90-degree side-actuated pins + side mechanical locating pegs + high-quality tactile snap dome." It is specifically tailored for side-actuation, edge-panel openings, and hardware terminals with strict requirements for lateral push resistance. The switch base is specially designed with plastic locating pegs on the side, which precisely insert into PCB positioning holes during SMT/DIP soldering, effectively resisting tilt and shear stress caused by frequent side pressing, protecting solder joints from cracking. Two actuation modes are available: latching (L, push-on/push-off) and non-latching/momentary (N, press to conduct/release to reset). Two operating forces are supported: 180g (standard crisp tactile feel) and 250g (strong damping, anti-accidental-touch feel). Additionally, both high-profile (suitable for deep-cavity panels) and flat-top (suitable for flush-mounted panels) actuator styles are offered for customer selection. Widely used in small appliance side control panels, smart home devices, security equipment, industrial control instruments, and various side-press terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm SMD push button switch (Model: SYCPB64L/N S Series) features a precision structure design combining a "5.8×5.8mm compact square base + SMT mounting terminals + high-quality tactile snap dome." It is specifically tailored for high-density SMT automated assembly processes, slim enclosure panels, and hardware terminals with stringent pad mounting size requirements. The switch offers three terminal length/span specifications (1.9mm / 2.6mm / 3.5mm) to precisely match different PCB pad designs; it also supports two actuation forces—180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel)—as well as two actuator styles: high-profile (suitable for deep-cavity panels) and flat-profile (suitable for flush-mounted panels). In terms of circuit control, it provides two action modes: latching (L, press once to ON / press again to OFF) and non-latching/momentary (N, press to conduct / release to reset). The high-temperature-resistant engineering plastic material supports SMT reflow soldering processes. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various SMD terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm flat-top through-hole tactile switch (Model: SYCPB64L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + flat-top actuator + 6-Pin DIP through-hole pins + high-quality tactile metal dome." It is specifically tailored for compact panel assembly, flush-fit housing cap integration, and hardware terminals with strict requirements for key feel and circuit control reliability. It offers two action modes: latching (L, press once to latch on / press again to release) and non-latching/momentary (N, press to connect / release to reset), as well as two operating force options: 180g (standard crisp tactile feel) and 250g (strong damping anti-misoperation feel) for customers to select as needed. The switch is equipped with 6-Pin DIP through-hole pins, which form a stable mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and flexible wiring. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various flat-enclosure terminals. 2D/3D drawings and free sample requests are available.

This 5.8×5.8mm high shaft through-hole push button switch (Model: SYCPB60L/N 180/250 series) features a precision structure design combining a "5.8*5.8mm compact square base + high shaft actuator + DIP through-hole pins + high-quality tactile snap dome." It is specifically tailored for deep-cavity panel assembly, deep cap mating, and hardware terminals with strict requirements for button feel and circuit control reliability. It offers two action modes: latching (L, press once to close/press once to open) and non-latching/momentary (N, press to close/release to reset), as well as two operating force specifications: 180g (standard crisp tactile feel) and 250g (strong damping anti-accidental-touch feel) for customers to select as needed. The switch is equipped with DIP through-hole pins, which form a sturdy mechanical connection with the PCB after wave soldering, effectively dispersing stress from frequent pressing, ensuring long mechanical life and stable circuit conduction. Widely used in small appliance main control boards, smart home control panels, security equipment, industrial control instruments, and various terminals with high shaft structures. 2D/3D drawings and free sample requests are available.

This SS-12D02 straight-handle miniature slide switch (Vertical Slide Switch SS-12D02 1P2T 3 Pin Through-Hole) features a design combining a "high-strength metal anti-corrosion housing + black POM engineering plastic straight handle + single-row 3-pin straight terminal pins + dual-side reinforced mounting legs." The circuit configuration is single-pole double-throw (1P2T, two-position ON-ON), enabling stable switching of a single power or signal line. The bracket positioning legs extending from both sides of the housing can be directly reflow-soldered onto the PCB, significantly absorbing lateral forces during toggle operation and protecting the 3 signal pins from stress concentration and solder detachment. The high-conductivity silver-plated contacts ensure smooth soldering and extremely low contact resistance. Widely used in digital toys, portable audio devices, small household appliances, medical instruments, and various PCB-mounted power control applications. 2D/3D drawings and free sample request services are available.

This SS-12D10 straight-handle miniature slide switch (Vertical Slide Switch SS-12D10 High Current 3A 1P2T 3 Pin Through-Hole) features a design of "thickened anti-corrosion metal housing + black anti-slip textured POM straight handle + single row 3-pin silver-plated straight terminal pins + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically optimized for power lines or strong-signal switching carrying up to 3A current; the anti-slip textured handle provides crisp damping and a strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals offer fast solder wetting and secure soldering. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, household small appliances, and various PCB mainboards requiring safe high-current switching. 2D/3D drawings and free sample service are available.

This SS-12D11 straight-handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12D11 High Current 3A 1P2T 3 Pin Through-Hole) features a "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + single-row 3-pin horizontal/right-angle silver-plated terminals + high-temperature-resistant high-current contact system" design. The circuit configuration is single-pole double-throw (1P2T 2-position ON-ON), optimized for power lines or strong-signal side switching carrying up to 3A current; the horizontal right-angle pins are ideal for mounting along the PCB edge for side operation, the anti-slip textured handle provides crisp damping and strong detent feel, and the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong solder joints. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample request service are available.

This SS-12D16 straight-handle miniature toggle switch (Panel Mount Slide Switch SS-12D16 High Current 3A 1P2T 3 Pin Solder Lug with Ears) features a design of "screw-mounting ears on both sides of the housing + black anti-slip textured POM straight handle + single-row 3-pin solder lug terminals with holes + high-temperature-resistant high-current contact system." The circuit configuration is single-pole double-throw (1P2T two-position ON-ON), specifically designed for scenarios requiring panel hole mounting with screw fixation and 3A high-current flying-lead soldering. The ears on both sides can be securely fastened to the equipment chassis with screws, withstanding high toggle forces. The 3-pin terminals feature standard wire-through holes, allowing wires to be hooked through before soldering, greatly enhancing physical pull-out resistance and preventing wire detachment. The embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise. Widely used in high-power lighting fixtures, control cabinet panels, portable energy storage devices, household small appliances, and various hardware systems requiring panel-locked high-current switching. 2D/3D drawings and free sample request service are available.

This upgraded derivative model of SS-12D11, the SS-12D28 Straight Handle Mini Toggle Switch (Right Angle Slide Switch SS-12D28 High Current 3A 1P2T 3 Pin Long Pins), features a design of "thickened anti-corrosion metal shell + black anti-slip textured POM straight handle + eye-catching red high-insulation engineering plastic base + single row 3 Pin long bent pins 90 degree side insert silver-plated terminals + high-temperature resistant high-current contact system." The circuit configuration is single pole double throw (1P2T two position ON-ON), specifically optimized for withstanding up to 3A current and for power line side switching operations requiring extended pins for through-hole board mounting or bridging; the extended 90 degree bent pin design facilitates fitting along the PCB edge and provides more stable mechanical through-hole soldering support; the embedded thickened alloy silver-plated contacts effectively reduce contact resistance and temperature rise, preventing contact erosion; the terminals have fast solder wetting and strong soldering reliability. Widely used in high-power lighting fixtures, power tools, portable energy storage devices, small household appliances, and various PCB mainboards requiring high-current side control. 2D/3D drawings and free sample requests are available.

This SS-12F23 straight handle miniature toggle switch (Horizontal Right Angle Slide Switch SS-12F23 Low Current 1P2T 5 Pin Through-Hole) features a design of "metal thickened anti-corrosion shell + black anti-slip textured POM straight handle + single row 3 Pin horizontal/right angle silver-plated terminals + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T 2 position ON-ON), specifically optimized for low current signal switching, logic control, and low power supply circuits; the horizontal right angle pins facilitate side operation when mounted along the PCB edge, and the anti-slip textured handle provides crisp damping with strong detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable signal transmission; terminals offer fast solder wetting and strong solder joints. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control boards. 2D/3D drawings and free sample request service are available.

This SS-12F24 straight handle miniature toggle switch (Vertical Slide Switch SS-12F24 1P2T 3 Pin DIP Straight Pins) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 3 Pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single pole double throw (1P2T two-position ON-ON), specifically optimized for vertical through-hole mounting on PCB mainboards, low-current signal switching, and low-power power supply circuits; the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear detent feel; internally, high-precision silver-plated contacts ensure low contact resistance and stable conductivity. Widely used in digital audio, Bluetooth devices, toys and gifts, small appliance mode selection, and various miniature PCB control mainboards. 2D/3D drawings and free sample requests are available.

This SS-13D01 straight-handle miniature toggle switch (Vertical Slide Switch SS-13D01 1P3T 4 Pin DIP Straight Pins 3-Position) features a design of "thickened metal anti-corrosion housing + black anti-slip textured POM straight handle + single row 4-pin vertical through-hole silver-plated terminals + PCB positioning pins on both sides + yellow insulating engineering plastic base." The circuit configuration is single-pole triple-throw (1P3T 3-position switching), specifically optimized for vertical through-hole mounting on PCB motherboards and multi-position function switching (such as low/medium/high fan speed selection, strong/weak/flash mode selection, or audio gain adjustment); the vertical through-hole pins combined with positioning pins on both sides of the housing ensure a firm lock onto the PCB, capable of withstanding high-intensity reflow soldering and frequent toggle operations; the anti-slip textured handle provides crisp damping and clear, distinct position feedback; internally, high-precision silver-plated contacts deliver low contact resistance and stable conduction performance. Widely used in portable fans, digital audio devices, small household appliances, medical instruments, and various PCB control motherboards requiring 3-position function switching. 2D/3D drawings and free sample requests are available.