The DC-005T is a 5.5mm standard large aperture DC power jack, compatible with 5.5x2.1 and 5.5x2.5mm male plugs. The tail features perforated solder lugs designed for wire lead soldering and panel mounting, providing stable conductivity and resistance to pulling, with drawings and free sample support available.

DC-031A is a horizontal SMD SMT DC power jack, compatible with 5.5x2.1 and 5.5x2.5mm power plugs. It features a metal reinforced shield cover and bottom positioning posts, specifically designed for high-speed SMT placement and reflow soldering, with strong pull-out resistance, and offers drawings and free samples upon request.

DC-033 is a fully encapsulated horizontal SMD SMT DC power jack with a 3.9mm outer diameter, offering two pin core specifications: 1.0mm and 1.3mm. Its compact size and space-saving design feature side soldering reinforcement tabs and dual bottom positioning posts, specifically engineered for automated reflow soldering. Drawings and free samples are available upon request.

DC-050 is a yellow high-temperature resistant plastic SMT DC power jack. It features a metal riveted reinforcement plate on top, providing strong mechanical pull strength. The yellow body facilitates visual error-proof identification, is compatible with reflow soldering processes, and offers drawings and free samples upon request.

DC-052 is an SMT-type DC power jack, featuring a mid-section metal wrap buckle and dual-side SMD pins, offering strong resistance to pull-out and peel forces during plugging and unplugging. It is compatible with reflow soldering processes, and engineering drawings and free sample requests are available.

DC-055A is an SMT patch-type DC power jack with a full metal shell covering. The shell features grounding reinforcement solder tabs, providing strong mechanical pull strength, resistance to electrostatic discharge and electromagnetic interference. Combined with the bottom positioning posts for stable mounting, drawings and free samples are available upon request.

DC-057 is an SMT patch-type DC power jack with a full metal shielded reinforced shell. It features an ultra-thin compact structure and side reinforcement foot design, effectively enhancing pull-out strength and electromagnetic interference resistance. It is compatible with reflow soldering, and drawings and free samples are available upon request.

DC-098 is an SMT DC power jack. Its body features an external metal reinforcing clip that combines the efficiency of automated SMT reflow soldering with extremely high mechanical pull-out strength, effectively preventing pad peeling and detachment. Drawings and free samples are available upon request.

DC-103C is a "front-SMD rear-DIP" mixed-mount DC power socket. It adopts a hybrid fixing structure combining front-end SMT pads with rear-end DIP through-hole pins, paired with fully gold-plated terminals, a reinforced clamp, and anti-misalignment positioning posts, offering both ease of SMD placement and extremely high tear resistance. Drawings and free samples are available upon request.

The DC-005T is a 5.5mm standard large aperture DC power jack, compatible with 5.5x2.1 and 5.5x2.5mm male plugs. The tail features perforated solder lugs designed for wire lead soldering and panel mounting, providing stable conductivity and resistance to pulling, with drawings and free sample support available.

DC-031A is a horizontal SMD SMT DC power jack, compatible with 5.5x2.1 and 5.5x2.5mm power plugs. It features a metal reinforced shield cover and bottom positioning posts, specifically designed for high-speed SMT placement and reflow soldering, with strong pull-out resistance, and offers drawings and free samples upon request.

DC-033 is a fully encapsulated horizontal SMD SMT DC power jack with a 3.9mm outer diameter, offering two pin core specifications: 1.0mm and 1.3mm. Its compact size and space-saving design feature side soldering reinforcement tabs and dual bottom positioning posts, specifically engineered for automated reflow soldering. Drawings and free samples are available upon request.

DC-050 is a yellow high-temperature resistant plastic SMT DC power jack. It features a metal riveted reinforcement plate on top, providing strong mechanical pull strength. The yellow body facilitates visual error-proof identification, is compatible with reflow soldering processes, and offers drawings and free samples upon request.

DC-052 is an SMT-type DC power jack, featuring a mid-section metal wrap buckle and dual-side SMD pins, offering strong resistance to pull-out and peel forces during plugging and unplugging. It is compatible with reflow soldering processes, and engineering drawings and free sample requests are available.

DC-055A is an SMT patch-type DC power jack with a full metal shell covering. The shell features grounding reinforcement solder tabs, providing strong mechanical pull strength, resistance to electrostatic discharge and electromagnetic interference. Combined with the bottom positioning posts for stable mounting, drawings and free samples are available upon request.

DC-057 is an SMT patch-type DC power jack with a full metal shielded reinforced shell. It features an ultra-thin compact structure and side reinforcement foot design, effectively enhancing pull-out strength and electromagnetic interference resistance. It is compatible with reflow soldering, and drawings and free samples are available upon request.

DC-098 is an SMT DC power jack. Its body features an external metal reinforcing clip that combines the efficiency of automated SMT reflow soldering with extremely high mechanical pull-out strength, effectively preventing pad peeling and detachment. Drawings and free samples are available upon request.

DC-103C is a "front-SMD rear-DIP" mixed-mount DC power socket. It adopts a hybrid fixing structure combining front-end SMT pads with rear-end DIP through-hole pins, paired with fully gold-plated terminals, a reinforced clamp, and anti-misalignment positioning posts, offering both ease of SMD placement and extremely high tear resistance. Drawings and free samples are available upon request.

The DC-005T is a 5.5mm standard large aperture DC power jack, compatible with 5.5x2.1 and 5.5x2.5mm male plugs. The tail features perforated solder lugs designed for wire lead soldering and panel mounting, providing stable conductivity and resistance to pulling, with drawings and free sample support available.

DC-031A is a horizontal SMD SMT DC power jack, compatible with 5.5x2.1 and 5.5x2.5mm power plugs. It features a metal reinforced shield cover and bottom positioning posts, specifically designed for high-speed SMT placement and reflow soldering, with strong pull-out resistance, and offers drawings and free samples upon request.

DC-033 is a fully encapsulated horizontal SMD SMT DC power jack with a 3.9mm outer diameter, offering two pin core specifications: 1.0mm and 1.3mm. Its compact size and space-saving design feature side soldering reinforcement tabs and dual bottom positioning posts, specifically engineered for automated reflow soldering. Drawings and free samples are available upon request.

DC-050 is a yellow high-temperature resistant plastic SMT DC power jack. It features a metal riveted reinforcement plate on top, providing strong mechanical pull strength. The yellow body facilitates visual error-proof identification, is compatible with reflow soldering processes, and offers drawings and free samples upon request.

DC-052 is an SMT-type DC power jack, featuring a mid-section metal wrap buckle and dual-side SMD pins, offering strong resistance to pull-out and peel forces during plugging and unplugging. It is compatible with reflow soldering processes, and engineering drawings and free sample requests are available.

DC-055A is an SMT patch-type DC power jack with a full metal shell covering. The shell features grounding reinforcement solder tabs, providing strong mechanical pull strength, resistance to electrostatic discharge and electromagnetic interference. Combined with the bottom positioning posts for stable mounting, drawings and free samples are available upon request.

DC-057 is an SMT patch-type DC power jack with a full metal shielded reinforced shell. It features an ultra-thin compact structure and side reinforcement foot design, effectively enhancing pull-out strength and electromagnetic interference resistance. It is compatible with reflow soldering, and drawings and free samples are available upon request.

DC-098 is an SMT DC power jack. Its body features an external metal reinforcing clip that combines the efficiency of automated SMT reflow soldering with extremely high mechanical pull-out strength, effectively preventing pad peeling and detachment. Drawings and free samples are available upon request.

DC-103C is a "front-SMD rear-DIP" mixed-mount DC power socket. It adopts a hybrid fixing structure combining front-end SMT pads with rear-end DIP through-hole pins, paired with fully gold-plated terminals, a reinforced clamp, and anti-misalignment positioning posts, offering both ease of SMD placement and extremely high tear resistance. Drawings and free samples are available upon request.