This 19C flat head ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting thread + 19C flat head press interface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head with power symbol light latching single-pole metal button switch adopts an industrial-grade precision design featuring "all-metal rugged housing + 19mm standard mounting hole thread + 19C flat head press interface + power symbol LED illumination + 1NO1NC SPDT circuit + waterproof sealed structure." The switch actuator is engraved with the internationally standard power symbol (available in red/green/blue/yellow/white and wide-voltage customization), providing highly intuitive on/off status indication for premium equipment; it employs a single-pole double-throw (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. It features latching function (press once to lock on / press again to reset off), and the housing offers IP67 waterproof and dustproof rating along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F flat-head ring-type power symbol illuminated latching SPDT metal push button switch adopts an industrial-grade precision design featuring "all-metal rugged housing + 16mm standard mounting hole thread + 16F flat-head press interface + dual LED illumination with ring and power symbol + 1NO1NC SPDT circuit + waterproof sealed structure." The switch actuator is engraved with the internationally standard power symbol and complemented by an illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing highly intuitive power on/off status indication for high-end equipment. It adopts a SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 lamp pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F flat-head ring illuminated self-locking single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 16mm standard mounting hole thread + 16F flat-head press interface + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a single-pole double-throw (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact-resistant performance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F high-profile ring illuminated self-locking SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 16mm standard mounting hole thread + 16F high-profile (convex) actuator surface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." The raised convex design delivers excellent tactile feedback and visual recognition, allowing for easy blind operation even when wearing industrial protective gloves. The actuator is equipped with a uniformly elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments. It adopts an SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. Featuring latching operation (press once to lock and maintain contact/press again to reset and disconnect), the housing offers IP67 waterproof and dustproof protection along with IK10 impact resistance, easily withstanding outdoor exposure to rain and harsh industrial conditions. 2D/3D drawings and free sample requests are available.

This 16A spherical screw-terminal momentary metal push button switch adopts an industrial-grade practical design featuring "all-metal sturdy housing + 16mm standard mounting hole thread + 16A smooth spherical pressing surface + screw clamp terminal (2-pin, no light) + 1NO normally open contact + waterproof sealed structure". The actuator features a full, rounded spherical (domed) design, offering a fine and comfortable touch with easy multi-angle pressing; the tail is equipped with a 2-pin screw clamp terminal, allowing quick wire clamping with a screwdriver without soldering, significantly lowering the barrier for on-site installation and maintenance. It features momentary self-reset function (press to close/release to automatically spring back and open), and the housing offers IP67 waterproof and dustproof protection along with IK10 impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A domed solder lug momentary metal push button switch adopts an industrial-grade practical design featuring a "full-metal rugged housing + 16mm standard opening thread + 16A smooth spherical pressing surface + solder lug terminal (2-pin, no light) + 1NO normally open contact + waterproof sealed structure." The actuator features a full, rounded spherical (domed) design, offering a fine and comfortable touch with easy multi-angle pressing; the tail is equipped with a 2-pin easy-solder terminal (with wire-through holes) that ensures smooth solder wetting and firm joints, greatly enhancing wiring stability and vibration resistance inside space-compact control boxes. It provides momentary self-reset function (press to close/release to automatically spring back and open), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A flat head screw terminal self-reset metal push button switch features an industrial-grade practical design with "all-metal rugged housing + 16mm standard mounting hole thread + 16A flat flush press surface + screw clamp terminals (2-pin, no light) + 1NO normally open contact + waterproof sealed structure." The actuator adopts a flat flush design that sits smoothly against the panel after installation, effectively preventing accidental actuation while maintaining a clean visual appearance. The tail is equipped with 2-pin screw clamp terminals, allowing quick wire connection with a screwdriver without soldering, significantly reducing the threshold for on-site installation and maintenance. It features momentary self-reset operation (press to close/release to automatically spring back and open), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof impact resistance, easily handling outdoor exposure to weather and harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A high-head screw-terminal self-reset metal push button switch adopts an industrial-grade practical design featuring a "full-metal rugged housing + 16mm standard mounting hole thread + 16A high-head (raised head) pressing interface + screw clamp terminals (no light, 2-pin) + 1NO normally open contact + waterproof sealing structure." The button head features a three-dimensional raised high-head design with high visual recognition, enabling precise blind operation even when wearing protective gloves; the tail is equipped with a 2-pin screw-fastened terminal block, allowing quick wire clamping with a screwdriver without the need for soldering, significantly lowering the barrier for on-site installation and maintenance. It offers momentary self-reset functionality (press to connect/release to automatically spring back and disconnect), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily coping with outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request services are available.

This 16A high-head solder-terminal momentary metal push button switch features an industrial-grade practical design combining a "full-metal rugged housing + 16mm standard mounting hole thread + 16A high-head (raised) press interface + solder terminals (2-pin, no light) + 1NO normally open contact + waterproof sealing structure." The actuator adopts a three-dimensional raised high-head design with high visual recognition and a clear press travel, enabling precise blind operation even with protective gloves; the tail is equipped with 2-pin easy-solder terminals (with wire-through holes) that offer smooth solder wetting and strong solder joints, greatly enhancing wiring stability and vibration resistance inside space-constrained control boxes. It features momentary self-reset functionality (press to close / release to automatically spring back and open), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting thread + 19C flat head press interface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head with power symbol light latching single-pole metal button switch adopts an industrial-grade precision design featuring "all-metal rugged housing + 19mm standard mounting hole thread + 19C flat head press interface + power symbol LED illumination + 1NO1NC SPDT circuit + waterproof sealed structure." The switch actuator is engraved with the internationally standard power symbol (available in red/green/blue/yellow/white and wide-voltage customization), providing highly intuitive on/off status indication for premium equipment; it employs a single-pole double-throw (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. It features latching function (press once to lock on / press again to reset off), and the housing offers IP67 waterproof and dustproof rating along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F flat-head ring-type power symbol illuminated latching SPDT metal push button switch adopts an industrial-grade precision design featuring "all-metal rugged housing + 16mm standard mounting hole thread + 16F flat-head press interface + dual LED illumination with ring and power symbol + 1NO1NC SPDT circuit + waterproof sealed structure." The switch actuator is engraved with the internationally standard power symbol and complemented by an illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing highly intuitive power on/off status indication for high-end equipment. It adopts a SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 lamp pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F flat-head ring illuminated self-locking single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 16mm standard mounting hole thread + 16F flat-head press interface + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a single-pole double-throw (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact-resistant performance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F high-profile ring illuminated self-locking SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 16mm standard mounting hole thread + 16F high-profile (convex) actuator surface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." The raised convex design delivers excellent tactile feedback and visual recognition, allowing for easy blind operation even when wearing industrial protective gloves. The actuator is equipped with a uniformly elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments. It adopts an SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. Featuring latching operation (press once to lock and maintain contact/press again to reset and disconnect), the housing offers IP67 waterproof and dustproof protection along with IK10 impact resistance, easily withstanding outdoor exposure to rain and harsh industrial conditions. 2D/3D drawings and free sample requests are available.

This 16A spherical screw-terminal momentary metal push button switch adopts an industrial-grade practical design featuring "all-metal sturdy housing + 16mm standard mounting hole thread + 16A smooth spherical pressing surface + screw clamp terminal (2-pin, no light) + 1NO normally open contact + waterproof sealed structure". The actuator features a full, rounded spherical (domed) design, offering a fine and comfortable touch with easy multi-angle pressing; the tail is equipped with a 2-pin screw clamp terminal, allowing quick wire clamping with a screwdriver without soldering, significantly lowering the barrier for on-site installation and maintenance. It features momentary self-reset function (press to close/release to automatically spring back and open), and the housing offers IP67 waterproof and dustproof protection along with IK10 impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A domed solder lug momentary metal push button switch adopts an industrial-grade practical design featuring a "full-metal rugged housing + 16mm standard opening thread + 16A smooth spherical pressing surface + solder lug terminal (2-pin, no light) + 1NO normally open contact + waterproof sealed structure." The actuator features a full, rounded spherical (domed) design, offering a fine and comfortable touch with easy multi-angle pressing; the tail is equipped with a 2-pin easy-solder terminal (with wire-through holes) that ensures smooth solder wetting and firm joints, greatly enhancing wiring stability and vibration resistance inside space-compact control boxes. It provides momentary self-reset function (press to close/release to automatically spring back and open), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A flat head screw terminal self-reset metal push button switch features an industrial-grade practical design with "all-metal rugged housing + 16mm standard mounting hole thread + 16A flat flush press surface + screw clamp terminals (2-pin, no light) + 1NO normally open contact + waterproof sealed structure." The actuator adopts a flat flush design that sits smoothly against the panel after installation, effectively preventing accidental actuation while maintaining a clean visual appearance. The tail is equipped with 2-pin screw clamp terminals, allowing quick wire connection with a screwdriver without soldering, significantly reducing the threshold for on-site installation and maintenance. It features momentary self-reset operation (press to close/release to automatically spring back and open), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof impact resistance, easily handling outdoor exposure to weather and harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A high-head screw-terminal self-reset metal push button switch adopts an industrial-grade practical design featuring a "full-metal rugged housing + 16mm standard mounting hole thread + 16A high-head (raised head) pressing interface + screw clamp terminals (no light, 2-pin) + 1NO normally open contact + waterproof sealing structure." The button head features a three-dimensional raised high-head design with high visual recognition, enabling precise blind operation even when wearing protective gloves; the tail is equipped with a 2-pin screw-fastened terminal block, allowing quick wire clamping with a screwdriver without the need for soldering, significantly lowering the barrier for on-site installation and maintenance. It offers momentary self-reset functionality (press to connect/release to automatically spring back and disconnect), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily coping with outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request services are available.

This 16A high-head solder-terminal momentary metal push button switch features an industrial-grade practical design combining a "full-metal rugged housing + 16mm standard mounting hole thread + 16A high-head (raised) press interface + solder terminals (2-pin, no light) + 1NO normally open contact + waterproof sealing structure." The actuator adopts a three-dimensional raised high-head design with high visual recognition and a clear press travel, enabling precise blind operation even with protective gloves; the tail is equipped with 2-pin easy-solder terminals (with wire-through holes) that offer smooth solder wetting and strong solder joints, greatly enhancing wiring stability and vibration resistance inside space-constrained control boxes. It features momentary self-reset functionality (press to close / release to automatically spring back and open), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head ring illuminated latching SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 19mm standard mounting thread + 19C flat head press interface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a SPDT (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 19C flat head with power symbol light latching single-pole metal button switch adopts an industrial-grade precision design featuring "all-metal rugged housing + 19mm standard mounting hole thread + 19C flat head press interface + power symbol LED illumination + 1NO1NC SPDT circuit + waterproof sealed structure." The switch actuator is engraved with the internationally standard power symbol (available in red/green/blue/yellow/white and wide-voltage customization), providing highly intuitive on/off status indication for premium equipment; it employs a single-pole double-throw (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. It features latching function (press once to lock on / press again to reset off), and the housing offers IP67 waterproof and dustproof rating along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F flat-head ring-type power symbol illuminated latching SPDT metal push button switch adopts an industrial-grade precision design featuring "all-metal rugged housing + 16mm standard mounting hole thread + 16F flat-head press interface + dual LED illumination with ring and power symbol + 1NO1NC SPDT circuit + waterproof sealed structure." The switch actuator is engraved with the internationally standard power symbol and complemented by an illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing highly intuitive power on/off status indication for high-end equipment. It adopts a SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 lamp pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. It features latching operation (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact resistance, easily withstanding outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F flat-head ring illuminated self-locking single-pole metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 16mm standard mounting hole thread + 16F flat-head press interface + ring LED illumination + 1NO1NC SPDT circuit + waterproof sealing structure." The switch actuator is equipped with a uniform and elegant ring LED illumination (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments; it adopts a single-pole double-throw (1NO1NC / 5-pin: 1 common pin + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit on/off control or NO/NC signal switching. It features latching function (press once to lock and conduct / press again to reset and disconnect), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof and impact-resistant performance, easily withstanding outdoor wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16F high-profile ring illuminated self-locking SPDT metal push button switch features an industrial-grade precision design with "all-metal rugged housing + 16mm standard mounting hole thread + 16F high-profile (convex) actuator surface + ring LED illuminated ring + 1NO1NC SPDT circuit + waterproof sealed structure." The raised convex design delivers excellent tactile feedback and visual recognition, allowing for easy blind operation even when wearing industrial protective gloves. The actuator is equipped with a uniformly elegant ring LED illuminated ring (supporting red/green/blue/yellow/white and wide-voltage customization), providing clear equipment status indication in complex environments. It adopts an SPDT (1NO1NC / 5-pin: 1 common + 1 normally open + 1 normally closed + 2 LED pins) wiring architecture, enabling precise single-circuit switching or NO/NC signal toggling. Featuring latching operation (press once to lock and maintain contact/press again to reset and disconnect), the housing offers IP67 waterproof and dustproof protection along with IK10 impact resistance, easily withstanding outdoor exposure to rain and harsh industrial conditions. 2D/3D drawings and free sample requests are available.

This 16A spherical screw-terminal momentary metal push button switch adopts an industrial-grade practical design featuring "all-metal sturdy housing + 16mm standard mounting hole thread + 16A smooth spherical pressing surface + screw clamp terminal (2-pin, no light) + 1NO normally open contact + waterproof sealed structure". The actuator features a full, rounded spherical (domed) design, offering a fine and comfortable touch with easy multi-angle pressing; the tail is equipped with a 2-pin screw clamp terminal, allowing quick wire clamping with a screwdriver without soldering, significantly lowering the barrier for on-site installation and maintenance. It features momentary self-reset function (press to close/release to automatically spring back and open), and the housing offers IP67 waterproof and dustproof protection along with IK10 impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A domed solder lug momentary metal push button switch adopts an industrial-grade practical design featuring a "full-metal rugged housing + 16mm standard opening thread + 16A smooth spherical pressing surface + solder lug terminal (2-pin, no light) + 1NO normally open contact + waterproof sealed structure." The actuator features a full, rounded spherical (domed) design, offering a fine and comfortable touch with easy multi-angle pressing; the tail is equipped with a 2-pin easy-solder terminal (with wire-through holes) that ensures smooth solder wetting and firm joints, greatly enhancing wiring stability and vibration resistance inside space-compact control boxes. It provides momentary self-reset function (press to close/release to automatically spring back and open), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily handling outdoor exposure to wind and rain as well as harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A flat head screw terminal self-reset metal push button switch features an industrial-grade practical design with "all-metal rugged housing + 16mm standard mounting hole thread + 16A flat flush press surface + screw clamp terminals (2-pin, no light) + 1NO normally open contact + waterproof sealed structure." The actuator adopts a flat flush design that sits smoothly against the panel after installation, effectively preventing accidental actuation while maintaining a clean visual appearance. The tail is equipped with 2-pin screw clamp terminals, allowing quick wire connection with a screwdriver without soldering, significantly reducing the threshold for on-site installation and maintenance. It features momentary self-reset operation (press to close/release to automatically spring back and open), and the housing offers IP67 waterproof and dustproof protection along with IK10 explosion-proof impact resistance, easily handling outdoor exposure to weather and harsh industrial environments. 2D/3D drawings and free sample requests are available.

This 16A high-head screw-terminal self-reset metal push button switch adopts an industrial-grade practical design featuring a "full-metal rugged housing + 16mm standard mounting hole thread + 16A high-head (raised head) pressing interface + screw clamp terminals (no light, 2-pin) + 1NO normally open contact + waterproof sealing structure." The button head features a three-dimensional raised high-head design with high visual recognition, enabling precise blind operation even when wearing protective gloves; the tail is equipped with a 2-pin screw-fastened terminal block, allowing quick wire clamping with a screwdriver without the need for soldering, significantly lowering the barrier for on-site installation and maintenance. It offers momentary self-reset functionality (press to connect/release to automatically spring back and disconnect), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily coping with outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample request services are available.

This 16A high-head solder-terminal momentary metal push button switch features an industrial-grade practical design combining a "full-metal rugged housing + 16mm standard mounting hole thread + 16A high-head (raised) press interface + solder terminals (2-pin, no light) + 1NO normally open contact + waterproof sealing structure." The actuator adopts a three-dimensional raised high-head design with high visual recognition and a clear press travel, enabling precise blind operation even with protective gloves; the tail is equipped with 2-pin easy-solder terminals (with wire-through holes) that offer smooth solder wetting and strong solder joints, greatly enhancing wiring stability and vibration resistance inside space-constrained control boxes. It features momentary self-reset functionality (press to close / release to automatically spring back and open), and the housing delivers IP67 waterproof and dustproof performance along with IK10 explosion-proof and impact resistance, easily withstanding outdoor wind, rain, and harsh industrial environments. 2D/3D drawings and free sample requests are available.