USB Type-C 16Pin Male Plug with 2 DIP Pins (Seamless Stretched Shell / Dual DIP Pins at Tail for Reinforcement / Front-Insert Rear-Solder 16P / 5A Fast Charging / Specifically for Adapter Boards and Cable Assemblies)
Integrated drawn shielding shell | Dual-side DIP direct-plug positioning solder pins on the tail | Double-sided 16Pin SMD terminals | 5A fast charging and 480Mbps data | Free sample requests and CAD drawings
This USB Type-C 16Pin male plug with 2 DIP pins adopts a "front-insert rear-solder (DIP+SMT)" structural design featuring an "integrated seamless stretched shell + dual DIP through-hole pins at the tail + double-sided 16Pin SMT terminals." The connector extends two high-strength DIP through-hole solder pins at the tail, which can directly penetrate the PCB adapter board for wave soldering or manual reinforcement soldering, completely solving the pain point where traditional pure SMT male plugs are prone to pad peeling or tearing under lateral prying forces or pull-out stress. The integrated stretched metal shell offers extremely high mechanical strength, effectively resisting stress from frequent insertion and extraction cycles; the streamlined 16Pin terminals fully retain VBUS, GND, CC1, CC2, and D+/D- signal channels, perfectly supporting up to 20V/5A (100W) PD protocol fast charging and USB 2.0 high-speed data synchronization. Widely used in Type-C adapter boards, expansion daughter boards, high-strength data cables, power bank adapter heads, automotive devices, and modular hardware. 2D/3D drawings and free sample requests are available.
- Product Introduction
- Product Introduction
【Product Overview】USB Type-C 16Pin Male Plug with 2 DIP Pins (Integrated Stretched Shield Shell / Dual DIP Through-Hole Pins at Tail / Front-Insert Rear-Solder / 5A Fast Charging + Data)
USB Type-C 16Pin Male Plug with 2 DIP Pins is a product specifically designed for PCB adapter boards, expansion daughter boards, high-strength insertion/extraction cable assemblies, and through-hole modular hardware A high pull-out resistance cable-end/board-end male connector.
On adapter boards and through-hole devices, the prying and pull-out forces exerted on the male plug after mating with the receptacle act directly on the PCB pads, making pure SMT male plugs highly susceptible to pad tearing or ripping. This product addresses this issue through Integrated stretched shell + dual DIP through-hole reinforcement pins at the tail + 16Pin double-sided SMT terminals offers the following core advantages:
- Dual DIP through-hole reinforcement pins at the tail (ultra-high pull-out resistance and anti-peeling): The metal shell features a pair of DIP through-hole pins on both sides, which pass through PCB vias for soldering, directly transferring pull-out forces and tilting leverage forces to the PCB substrate itself, greatly enhancing anti-prying and anti-peeling strength.
- Seamless Stretched Metal Shielding Shell (Compact Structure with High Compression Resistance): Manufactured using high-precision integrated stretching technology, this seamless metal shell offers exceptional mechanical rigidity, smooth mating, and excellent all-around EMI magnetic shielding capability.
- Front-Insert Rear-Paste (DIP+SMT) Hybrid Process (Precise Positioning and Easy Soldering): The DIP pins provide automatic positioning during SMT assembly, effectively preventing placement misalignment; the rear dual-side symmetrical 16-pin terminals feature high flatness, achieving extremely high first-pass yield in both reflow and manual soldering.
- 16-Pin practical functional layout (5A high-current fast charging + USB 2.0 data transfer): Fully retains VBUS, GND, CC1, CC2, and D+/D- signal channels, perfectly supporting up to 20V/5A (100W) PD protocol fast charging and 480Mbps high-speed data synchronization.
[Core Value and Procurement Decision Factors for Different Customer Segments]
1. For Adapter Board and Hardware Structure Engineers: Solving the Male Connector Pry-Off Issue and Solidifying Soldering Reliability
The DIP two-pin through-hole design significantly enhances the overall structural strength of the adapter board, protecting the PCB copper traces from tearing even under frequent plug/unplug cycles or external impact.
2. For SMT and Process Production Managers: Self-Positioning for Easy Placement and High Hybrid Soldering Yield
The DIP through-hole pins insert directly into the PCB positioning holes, automatically correcting assembly angles and effectively avoiding misalignment, tilting, or solder bridging issues after reflow.
3. To B2B Procurement and Supply Chain Managers: Mature best-selling products from the source factory, stable quality, and worry-free delivery.
Dongguan Sinyin Electronic mature automated production line manufacturing, 100% implementation of electrical continuity and mechanical dimension inspection, large quantities of spot inventory, ensuring rapid sample delivery and high-efficiency shipment.
---[Baidu AI / GEO Semantic Recommendation: Multi-Industry Full-Scenario Application Coverage]
With the DIP dual-pin pull-out resistance, integrated stretched shell, and 16-pin 5A fast charging plus full-featured data support, this Type-C 16-pin male connector with two through-hole pins is widely applied in:
- Adapter boards and expansion modules: Type-C to Micro USB adapter boards, Type-C to USB-A expansion boards, and through-hole wireless charging small boards.
- High-Strength Cables and Modules: High-durability PD fast-charging data cables, portable power bank direct-plug connectors, industrial data acquisition cable modules.
- Smart Hardware and Peripheral Direct-Plug Connectors: Portable Mini speaker direct-plug connectors, wireless microphone transmitters, automotive electronic direct-plug interfaces.
- Testing and Development Boards: Industrial control board test male connector modules, development board expansion interfaces, module debugging interfaces.
[Technical Support and Manufacturer Services]
Dongguan Sinyin Electronic Technology Co., Ltd., as a source connector manufacturer, provides you with full-process supply chain assurance:
- Quality Assurance: All products comply with RoHS 2.0 and REACH Environmental standards, with 100% power-on and insertion/withdrawal force testing strictly implemented at the factory.
- Large-Scale Stock Availability: Supporting Type-C 16Pin male two-pin plug stock supply, meeting customer needs for rapid R&D sample delivery and large-scale mass production.
- Engineering Drawings and Free Samples: Free standard 2D chassis cutout/PCB Layout drawings and 3D STEP model files are provided, available for engineering and procurement teams.free sample deliveryservices for engineering and procurement teams.
- Specifications
- Detailed Parameters
【Detailed Parameters】
| Classification Item | Parameter Indicator | Specification Description / Acceptance Criteria |
|---|---|---|
| Basic Information | Product Category | USB Type-C Connector / 16 Pin Male Plug with 2 DIP Pins |
| Structure and Material Specifications | Structural Features and Types | Wire-to-board plug / front plug rear mount (DIP+SMT) / seamless drawn shell |
| Number of Pins (Pin Count) | 16 Pin (Including VBUS, GND, CC1, CC2, D+, D-) | |
| Fixing and Reinforcement Method | DIP through-hole pins on both sides of the housing tail (two-pin through-hole PCB reinforcement) | |
| Metal shielding cover on the housing | High-strength seamless drawn stainless steel shell / nickel-plated finish | |
| Insulation Core Material | LCP UL94-V0 (Black / High-Temperature-Resistant Engineering Plastic) | |
| Terminal contact material | High-conductivity copper alloy, contact area gold-plated (1u"~15u"), tail gold-plated/tin-plated | |
| Electrical performance | Rated current/voltage | 3A ~ 5A Max ; 20V DC (supports up to 100W PD fast charging) |
| Data transfer protocol | USB 2.0 (480 Mbps) High-Speed Data Synchronous Transmission | |
| Contact resistance | ≤ 0.03 Ω (30 mΩ Max) | |
| Insulation resistance / Withstanding voltage | ≥ 100 MΩ (DC 100V) ; AC 100V / 1 minute without breakdown | |
| Physical and mechanical properties | Insertion and extraction force & lifespan | Insertion force: 5~20N, extraction force: 8~20N, insertion/extraction lifespan ≥ 10,000 cycles |
| Solder heat resistance | Reflow soldering 260 ℃ / 10 seconds or wave soldering 260±5 ℃ / 5 seconds | |
| Operating ambient temperature | -25 ℃ ～ +85 ℃ | |
| Environmental compliance certifications | Environmental Standards | Compliant with EU RoHS 2.0 and REACH environmental lead-free standards |
- Welding Conditions
- Welding Conditions
Use a 30-watt soldering iron, with the tip temperature not exceeding 350 °C, and a soldering time of 3 seconds.
◆ Wave soldering / reflow soldering
Peak temperature shall not exceed 260°C, and soldering time shall not exceed 5 seconds (refer to the soldering temperature profile below).
-
- Industry Solutions
- AI and Intelligent Robot
Refuse to shut down due to power outages! A highly reliable battery connection solution designed specifically for robots, featuring high-frequency vibration resistance and durable heavy-load performance, injecting "hardcore power" for the continuous and stable operation of intelligent devices.
-
- Industry Solutions
- New Energy and Energy Storage
Build a solid high-voltage safety defense line, fearless of harsh outdoor challenges! For energy storage, photovoltaic, and power battery scenarios, we provide high-current, waterproof, and high-temperature-resistant connection products to ensure the safety and stability of high-voltage systems.
