SK-14D02 Side-insertion Slide Switch (White Handle/1P4T/1 Pole 4 Position 5 Pin/DIP Side-insertion Type/Board-edge Bent Reinforcement Legs/Customizable Handle Length/Four-position Adjustment/Free Samples)
Sinyin SK-14D02 side-entry white handle slide switch | 1P4T (1 pole 4 positions 5 pins) | Compatible with light-colored housings and white handle | Board-edge bent reinforced legs | Free samples and CAD/3D drawings
Sinyin Electronic Original SK-14D02 is a DIP side-insertion type 1P4T (1 pole 4 position 5 Pin) four-position slide switch, featuring a white POM high flame-retardant handle that perfectly matches the overall aesthetics of white and light-colored shell products. The bottom 5-pin structure enables precise switching among 4 independent positions. Both ends of the housing are equipped with dedicated side-insertion bent reinforcement legs that tightly grip the PCB board edge, providing strong peel resistance (>40N). Handle length (2.0-10.0mm) and shape support customization, with crisp and clear position detent feel. Widely used in white small household appliances, light-colored portable beauty devices, white medical testing instruments, and audio equipment. Compliant with RoHS 2.0/REACH regulations, with free 2D/3D model downloads available.
- Product Introduction
- Product Introduction
[Appearance and Structure] SK-14D02 DIP board-edge side-insertion four-position white-handle slide switch (1P4T / 1 pole 4 position 5 pin)
SK-14D02 Side-insertion White-handle Slide Switchis an electronic component designed by Shinyin Electronics specifically forFor white or light-colored appearance products, requiring PCB board-edge side mounting and 4-position function switchingDesigned electronic components. The switch is equipped with a high-appearance-standardpure white flame-retardant POM handle, which seamlessly blends into the appearance of white-shell products, avoiding the visual disconnect caused by black handles.
The circuit structure is 1P4T (1 pole 4 position / 5 Pin), including 1 COM common terminal and 4 gating positions. Both sides of the housing featureside-angled folded metal solder feet, which, after through-hole soldering, lock firmly against the PCB board edge, ensuring structural stability without deformation during frequent four-position push-pull operations.
---【SK-14D02 White Handle Side-Insert Version Core Advantages】
- 1. Light-colored appearance perfectly matches: High-quality white POM handle, resistant to yellowing and wear, especially suitable for handle gaps exposed on the housings of white small appliances, white medical and beauty instruments.
- 2. 1P4T precise four-position detent feel: Built-in high-precision slot positioning spring, the sliding handle moves smoothly across 4 positions with clear and crisp detent feedback, no skipping or locking.
- 3. High-strength locking for board-edge side insertion: The housing's folded reinforced feet firmly grip the PCB board edge through-holes, with resistance to lateral push-pull peel force up to >40N, significantly reducing the risk of solder joint detachment caused by frequent handle push-pull operations.
- 4. Thickened silver-plated contacts with low impedance: The internal sliding contact pieces and terminals are both treated with multiple layers of thickened silver plating, resulting in low contact resistance (≤30mΩ), low temperature rise under high current, and reliable conduction.
【Targeted Application Scenarios】
| Key application areas | Matching four-position white handle functional logic with end products |
|---|---|
| White personal care and beauty devices | White portable hair removal devices/beauty devices (Off - Gentle - Medium - Strong), white electric facial cleanser side gear switching |
| Light-colored home and portable small appliances | White desktop small fans (Off - Gear 1 - Gear 2 - Gear 3), white heating scarves/warm air blowers with four-level temperature adjustment |
| White portable medical and testing equipment | Portable forehead thermometers/pulse oximeters with side mode setting buttons, medical portable testing instruments with four-level range selection |
【Sinyin Electronic Engineering Support】
- Free prototyping and testingSupport: Free samples of SK-14D02 white handle in various handle lengths are available to assist in prototype development for R&D.
- Complete 3D step drawings (STEP)Provide precise 2D PCB Layout hole position diagrams and 3D STEP models, making it convenient for structural engineers to import for color and gap interference verification.
- Specifications
- Detailed Parameters
| Product Model | SK-14D02 (Side-insert White Handle Version) | Circuit Loop/Positions | 1P4T (1 Pole 4 Position / Single Pole Four Position) |
| Handle Color/Material | White / High Wear-resistant Flame-retardant POM Material | Mounting Method | DIP Board-Edge Side-Mount (Through-Hole) |
| Pins and Structure | 5 Functional Pin Pins + 2 Side-insert Bent Reinforcement Pins | Handle Height/Stem Length (G) | 2.0 / 3.0 / 4.0 / 5.0 / 7.0 / 10.0mm (Customizable per Drawing) |
| Rated Load | DC 12V 0.1A / DC 30V 0.3A / DC 50V 0.5A | Contact resistance | ≤ 30 mΩ (initial value) |
| Insulation resistance | ≥ 100 MΩ (DC 500V) | Withstanding voltage strength | AC 500V (50-60Hz) / 1 minute without breakdown |
| Actuation Force/Operating Force | 250 ± 100 gf | Service Life | Mechanical/electrical life ≥ 10,000 cycles |
| Peel resistance | ≥ 40 N (side-insertion folded corner solder foot locking) | Environmental Compliance | Complies with RoHS 2.0 / REACH directives |
- Welding Conditions
- Welding Conditions
Use a 30-watt soldering iron, with the tip temperature not exceeding 350 °C, and a soldering time of 3 seconds.
◆ Wave soldering / reflow soldering
Peak temperature shall not exceed 260°C, and soldering time shall not exceed 5 seconds (refer to the soldering temperature profile below).
