SK-22F14 Side-Handle Toggle Switch_2P2T Right-Angle SMT Type_Vibration Resistance 20G_Electrical Life 10,000 Cycles_C&K OS Series Domestic Alternative_Sinyin Electronic
Automotive OBD diagnostic interface anti-vibration locking | Industrial PLC signal matrix channel switching | UAV flight controller redundant power hot backup solution
SK-22F14 is a 2P2T side-insertion toggle switch specifically designed for high-vibration, high-reliability application scenarios. Unlike conventional side-toggle switches, the SK-22F14 features a right-angle SMT pin design combined with snap-in positioning posts for dual fixation, verified to withstand random vibration of 20G (10-500Hz/XYZ three axes, 2 hours each) without loosening; the thickened silver alloy sliding contacts paired with a dual-spring preload structure achieve an electrical life of over 20,000 cycles (@DC12V 0.1A), making it suitable for harsh environments such as automotive OBD diagnostic interfaces, industrial PLC signal switching, and redundant power supply for drone flight controllers. Sinyin Electronic provides direct factory supply, supports reflow soldering SMT assembly processes, and offers free SMT stencil aperture recommendations and reflow oven temperature curve parameters.
- Product Introduction
- Product Introduction
I. Why is an SMT right-angle side-toggle switch needed? — A joint call from production lines and R&D
Traditional DIP through-hole side-toggle switches require through-hole soldering, which not only occupies the backside space of the PCB but also cannot be integrated into fully automated SMT production lines.The SK-22F14 adopts Gull Wing right-angle SMT pins, combined with 2 snap-in positioning posts (inserted into PCB positioning holes for pre-fixation before reflow soldering), achieving:
- Full SMT process compatibility: No DIP process required, saving wave soldering fixture costs and labor, with production line first-pass yield improved to 99.5%+
- Zero components on PCB backside: Right-angle SMT mounting on the board surface allows continued placement of other SMD devices on the backside, maximizing double-sided utilization
- Vibration resistance reliability: Dual fixation with snap-in positioning posts + bent-foot solder pads, verified to pass random vibration 20G (MIL-STD-202 Method 214A), completely solving the issue of switch detachment in high-vibration environments such as automotive and drone applications
2. SK-22F14 vs SK-22F12: A Table to Understand the Selection Differences at a Glance
| Comparison Dimension | SK-22F14 (This Version) | SK-22F12 |
|---|---|---|
| Installation Process | SMT reflow soldering (preferred for fully automated production lines) | DIP wave soldering / manual soldering |
| Pin Fixation Method | Bent-foot solder pads + snap-in positioning posts (dual fixation) | Through-hole + bent reinforcement legs |
| Electrical life | ≥10,000 cycles @DC12V 0.1A | ≥10,000 cycles @DC30V 0.3A |
| Contact resistance | ≤20mΩ initial / ≤40mΩ after life | ≤30mΩ initial / ≤50mΩ after life |
| Rated voltage | DC 24V max (low-voltage signal / low-power scenarios) | DC 50V max (medium-power supply scenarios) |
| Actuation Force | 180±80gf (light-touch type, suitable for frequent operation) | 250±100gf (standard type, strong tactile feedback) |
| Vibration resistance | 20G random vibration (MIL-STD-202) | 10G sinusoidal vibration |
| Typical applications | Automotive OBD/PLC signal switching/UAV flight control | Medical instruments/microphone channels/beauty device modes |
- Specifications
- Detailed Parameters
| Product Model | SK-22F14 Gull Wing SMT Version (SMT Side Mount) | Circuit | 2P2T / DPDT / 2 Pole 2 Position |
| Terminal Type | Gull Wing SMT + 2 Snap-in Positioning Pins | Mounting Method | SMT Surface Mount (Side Mount Reflow) |
| Actuator Type --- | Extended Convex Handle / Handle Length 3.0-8.0mm Customizable (±0.1mm) | Rating | DC 5V 0.05A / DC 12V 0.1A / DC 24V 0.2A |
| Contact Resistance (Contact R) | ≤20mΩ (Initial) / ≤40mΩ (After Life at 20,000 Cycles) | Insulation Resistance (Insulation R) | ≥500MΩ @DC250V / 1min |
| Dielectric Withstanding Voltage (Dielectric) | AC 250V (50-60Hz) / 1min No Breakdown | Operating Force | 180±80gf (Light Touch Type / Suitable for Frequent Operation) |
| Electrical Life | ≥10,000 cycles (@DC12V 0.1A/20cpm) | Vibration Resistance | Random vibration 20G (10-500Hz/XYZ each 2h/MIL-STD-202) |
| Shock Resistance | 50G half-sine wave 11ms (3 times per axis) | Operating Temperature Range | -40℃ ~ +85℃ (Industrial grade wide temperature) |
| Pin Coplanarity | ≤0.10mm (Meets SMT automatic placement requirements) | Packing Method | Tray / Optional Tape & Reel (T&R) |
- Welding Conditions
- Welding Conditions
Use a 30-watt soldering iron, with the tip temperature not exceeding 350 °C, and a soldering time of 3 seconds.
◆ Wave soldering / reflow soldering
Peak temperature shall not exceed 260°C, and soldering time shall not exceed 5 seconds (refer to the soldering temperature profile below).
-
- Industry Solutions
- AI and Intelligent Robot
Refuse to shut down due to power outages! A highly reliable battery connection solution designed specifically for robots, featuring high-frequency vibration resistance and durable heavy-load performance, injecting "hardcore power" for the continuous and stable operation of intelligent devices.
-
- Industry Solutions
- New Energy and Energy Storage
Build a solid high-voltage safety defense line, fearless of harsh outdoor challenges! For energy storage, photovoltaic, and power battery scenarios, we provide high-current, waterproof, and high-temperature-resistant connection products to ensure the safety and stability of high-voltage systems.
