SK-24F01 Side-Handle Toggle Switch_2P4T Four-Position Low Profile_F Series Flat Top Side-Insert DIP_Preferred for Multi-Mode Control in Compact Devices_Singatron Original Manufacturer
Safety position switching in medical wearable devices | Flush mounting for industrial HMI panels | Space optimization for embedded instruments | High-reliability domestic alternative
SK-24F01 is a 2P4T (double-pole, four-position) side-handle toggle switch from Singatron's F Series (Flat Top), designed for applications with limited panel space, flush mounting requirements, or anti-accidental-touch needs. Its flat-top handle height is significantly lower than that of the D Series, and combined with a metal shielding shell and side-insert DIP packaging, it achieves a balance of miniaturization and high reliability. Rated load: DC 50V 0.3A, compliant with RoHS 2.0 and REACH environmental directives. ⚠️ Note: The F Series and D Series have poor physical compatibility. Before replacement, be sure to verify the dimensional drawings and truth table in the SK-24F01 specification sheet.
- Product Introduction
- Product Introduction
I. Core Advantages of the F Series: Why Choose SK-24F01? — Unlocking Hardware Freedom in "Space-Constrained" Scenarios
As modern electronic products trend toward thinner, lighter, and more integrated designs, traditional raised-handle switches have become a bottleneck in PCB layout. The SK-24F01'sF Series Flat Top designoffers a revolutionary solution:
- Specifications
- Detailed Parameters
| Product Model | SK-24F01 (F Series - Flat Top) | Circuit Configuration | 2P4T / DP4T / 2-Pole 4-Position (Confirmed by physical unit + industry convention) |
| Mounting Method | DIP Side-Mount Through-Hole (Side Mount THT) | Handle Type | Flat Top Black Handle —— Height significantly lower than D Series, suitable for flush panels |
| Pin Configuration | 10 Pin Function Pins + Bottom Reinforcement Pins (2P4T Standard) | Housing Material | Nickel-Plated Metal Housing (EMI Shielding, confirmed by reflective image characteristics) |
| Rated Load | DC 50V 0.3A(Singatron Electronics D/F Series General Specifications, no conflict with image) | Dimensions | Subject to official specification sheet (⚠️ F Series has lower height, typical total height approx. 6.5~7.0mm, not D Series 8.2mm) |
| Handle Height | Low Profile Design (Flat Top) | Panel cutout recommendation | Width ≥9.0mm × Height ≥6.0mm (reserve 0.5mm clearance), please refer to the datasheet for details |
| Actuation Force/Travel | Refer to official specification sheet (undisclosed data, not to be speculated) | ||
| Certification Standards | RoHS 2.0 / REACH | 3D model support | STEP format download is available on the official website (including F-series dedicated footprint) |
- Welding Conditions
- Welding Conditions
Use a 30-watt soldering iron, with the tip temperature not exceeding 350 °C, and a soldering time of 3 seconds.
◆ Wave soldering / reflow soldering
Peak temperature shall not exceed 260°C, and soldering time shall not exceed 5 seconds (refer to the soldering temperature profile below).
-
- Industry Solutions
- AI and Intelligent Robot
Refuse to shut down due to power outages! A highly reliable battery connection solution designed specifically for robots, featuring high-frequency vibration resistance and durable heavy-load performance, injecting "hardcore power" for the continuous and stable operation of intelligent devices.
-
- Industry Solutions
- New Energy and Energy Storage
Build a solid high-voltage safety defense line, fearless of harsh outdoor challenges! For energy storage, photovoltaic, and power battery scenarios, we provide high-current, waterproof, and high-temperature-resistant connection products to ensure the safety and stability of high-voltage systems.
