Product Overview

The Sinyinda SYCBCHY110A6P2D4XM is an IP65-rated waterproof 2+4 composite power and signal plug male connector specifically designed for demanding outdoor and industrial environments. This product features a high-strength PA engineering plastic housing and precision sealing structure, combined with copper gold-plated (1u) contact technology, achieving 2 channels of 60A high-current main circuits + 4 channels of 3A low-current signal circuits as independent pathways; rated voltage DC 500V, operating temperature -20°C~+100°C, RoHS environmental compliance certified, recommended insertion/extraction life up to 1000 cycles, equipped with M3 countersunk screw holes at four corners, and precisely mates with the female connector SYCBCHY110A6P2D4XF to form a complete IP65 protection system, perfectly suited for scenarios with extreme requirements for "waterproof and dustproof + multi-channel signal synchronization + medium-to-high power transmission" such as outdoor energy storage power station BMS communication wiring harnesses, industrial AGV outdoor charging gun heads, marine electronic control system integrated cables, and special vehicle power battery output terminals.

Product Introduction

Core advantages:

• IP65-level protection:Precision sealing ring + housing structure design effectively prevents dust ingress and low-pressure water jet spray, adapting to harsh conditions such as outdoor rain, snow, dust, and washing.
• Dual-channel isolation design:The 2-channel 60A main circuits and 4-channel 3A signal circuits are physically isolated to avoid electromagnetic interference, ensuring signal purity and synchronization across multiple channels.
• High current-carrying capacity:Single-pin 60A on the main circuit with a total carrying capacity of 120A, meeting the requirements of medium-to-high power equipment.
• High-conductivity contacts:Copper substrate + gold-plating (1u) process ensures low contact resistance and high signal integrity, maintaining stable conductivity even in humid environments.
• Stable mounting structure:Four-corner M3 countersunk screw hole design prevents loosening from vibration and enhances mechanical reliability.
• Long-life design:1000 mating cycles lifespan, meeting high-frequency maintenance requirements.

Engineer's Selection Guide

Applicable scenarios:

• Outdoor energy storage power station BMS communication and auxiliary power supply wiring harness fabrication
• Industrial AGV outdoor charging docking station cable end (power + status feedback + temperature control signal)
• Marine electronic control system integrated cable (power + navigation/sensor signal)
• Special vehicle power battery management output end (such as fire trucks, engineering vehicles)
• Outdoor communication base station backup power supply wiring harness

Selection recommendations:

• Must be paired with the female socket SYCBCHY110A6P2D4XF to ensure the IP65 protection rating is effective.
• It is recommended to use a hydraulic crimping tool for the main circuit terminals to ensure contact reliability under 60A current carrying capacity.
• It is recommended to use a dedicated wire crimping tool for signal circuit terminals to avoid loose connections causing signal loss.
• During installation, pay attention to the compression amount of the sealing ring; both excessive and insufficient compression can affect waterproof performance.
• For higher protection ratings (such as IP67/IP68), a fully potted version can be customized.
• M3 screws are recommended to be made of 304 stainless steel to avoid outdoor corrosion.
• During wiring, keep the main circuit and signal circuit routed separately to avoid crosstalk.
• Regularly clean the sealing surface to prevent sediment buildup from affecting waterproof performance.
• The 4 signal circuits can be assigned to different functions such as CAN, RS485, temperature detection, etc. as needed.